802.3ad

  1. M

    LAG 803.ad Connection Issues

    We have a single Proxmox host running 8.4.1 connected to a Juniper 4400xd-48F switch. The object is to use two SFP+ connections on the Proxmox host to connect to the Juniper switch which will also be networked to our primary storage unit for NFS VM storage. If we connect to the switch via a...
  2. A

    LACP Problem with DELL R760 Server and 2 Network Cards

    Hello, we have a strange problem with the Proxmox server. We have DELL R760 servers with 4 x 25 GbE onboard cards (Broadcom) and an additional 2 x 25 GbE AddOn PCI card (Broadcom). A LACP Bond 802.3ad has been set up. The bond is stable. However, if we fetch data via this channel from a VM from...
  3. R

    [SOLVED] Tuning

    Good afternoon. I have a production HA setup with shared iscsi. I fear I've misconfigured things and am stuck with the poor performance I'm experiencing. I have 5 HA hosts. 4 active with guests and #5 for voting only. - Each is dual port 802.3ad LACP bound 10 GIG MTU 9000 - HA configured iSCSI...
  4. P

    802.3ad, no partner PDU

    Hi all, I have a cluster with 6 members, linked to a Ubiquiti Edgeswitch. On each members, I have setup two links, and whilst round-tobin works just great; I wanted to go to 8023.ad. I give the configuration on the Proxmox side below. On the switch side, I do have 3 non-proxmox members doing...
  5. G

    Bonded vmbr but only 1 port works at a time

    Hi, Hope you can help me solve why only one ports is active at a time in a bonded virtual bridged port. I have PVE on a bare metal unit with 6 intel I211 ports. In a bonded pair, it seems like only one port is active at a time. The config in the interfaces file is for LACP mode which, from...
  6. ThinkAgain

    LAG, HP1810 Switch

    Hi, I'm trying to connect my Promox machine via Link Aggregation to a HP1810 switch. For this purpose, I have configured two ports as trunk (LACP Active) in the web interface of the switch and link aggregation on Proxmox. netstat -i suggests that this is working: Iface MTU RX-OK RX-ERR...
  7. D

    802.3ad failover time when bringing a slave interface down

    I noticed something strange recently. If I bring a slave interface of a bond with mode 802.3ad down, the bond loses network connectivity for about 70-80s. If I unplug the cable I lose connectivity for less than one second (2 lost pings when intervalis 0.1s) which is what I would expect. I can...
Top Bottom