/dev/hwrng for AMD Ryzen seems to be broken again. If try to spin up one of my VMs with rng0: source=/dev/hwrng, I get:
TASK ERROR: Cannot start VM with passed-through RNG device: '/dev/hwrng' exists, but '/sys/devices/virtual/misc/hw_random/rng_current' is set to 'none'. Ensure that a...
Hi Ramalama,
Thanks very much for the pointer to the maint_mode script - very useful! I often want to be able to do this.
As you have an x570 motherboard does /dev/hwrng work for you? It would be useful to know what board you have and what AGESA version?
Kind regards,
Jonathan
Hi Fiona,
No, I am not running the very latest BIOS for my motherboard. My current BIOS is from August 2022 and has the 'Update to AGESA ComboAm4v2PI 1.2.0.7.' patches. I thought this patch was meant to fix these problems. Your link does not mention what AGESA patch is necessary to fix this but...
So if I boot with the old kernel (5.15.108-1-pve), the output of the above commands is:
root@pve1:~# cat /sys/devices/virtual/misc/hw_random/rng_current
tpm-rng-0
root@pve1:~# cat /sys/devices/virtual/misc/hw_random/rng_available
tpm-rng-0
and I can start the VM without problem using rng0...
Hi Fiona,
This is the output I get from those 2 commands (on 5950x):root@pve1:~# cat /sys/devices/virtual/misc/hw_random/rng_current
none
root@pve1:~# cat /sys/devices/virtual/misc/hw_random/rng_available
root@pve1:~#
Note that the last command seems to output a blank line.
I also have a...
Slight problem running my VM after upgrading to 8.0.3. Upgrade seemed to go well but my VM won't start with it's original settings. I get the error:
Cannot start VM with passed-through RNG device: '/dev/hwrng' exists, but '/sys/devices/virtual/misc/hw_random/rng_current' is set to 'none'...
On my Ryzen 3900x:
All my LXCs (5 of them) work fine
2 x VM (Windows 10 Pro 12Gb and 8Gb RAM respectively) with PCIe passthrough: still work fine
VM (Nethserver based on CentOS 3Gb RAM) with PCIe passthrough: can't find any drives
VM Ubuntu with PCIe passthrough (8Gb RAM): works fine
VM Ubuntu...
Hopefully someone will be able to diagnose what the problem is with Ryzen and this firmware. Until then I will stick with the old firmware.
Thanks for all the help!
Kind regards,
Jonathan
Hi Fiona,
I tried it with pve-edk2-firmware: 3.20221111-1 and pve-qemu-kvm: 7.2.0-5 on the Ryzen node but the VM fails as before. If I go back to pve-edk2-firmware: 3.20220526-1 and pve-qemu-kvm: 7.2.0-7, it works again.
So I think the problem lies with pve-edk2-firmware: 3.20221111-1...
This seems to be the same problem that I was experiencing. See here:
https://forum.proxmox.com/threads/select-vms-fail-to-start-after-latest-update.124240/#post-540903
Leesteken's solution solved my problem as well. Thanks to him for tracking it down
I have a weird recent problem that some of my VMs fail to start after updating Proxmox. Some start fine but 2 always fail. The weird part is that if I copy them over to another Proxmox machine (which has not been updated) they start without any problem but I do have to make a couple of config...
I have an Intel x710 nic with 24 SR-IOV instances some of which are used in VMs. Before the VMs are launched, I set their mac address and vlan in systemd script like so:
ExecStart=/usr/bin/bash -c '/usr/sbin/ip link set enp43s0f0 vf 1 mac 80:06:90:10:00:01 vlan 1 trust on'
The VMs spin up fine...
Hi All, I wondered if anyone can shed a little light on a problem I have. I have a Windows 10 VM with Spice drivers and virtual nic passthrough working perfectly. When I try to update it with the 22H2 update, everything seems to be ok until I reboot. Then I get a BSOD error 0xc000021a and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.