Search results

Please excuse me for my poor English. When I boot with usb pcie card I cannot start my VM which gets a RTX 2070 SUPER passed through. Before that those vms worked normal. First dmesg showed "failed to set apst feature (-19)" so I googled and set nvme_core.default_ps_max_latency_us to 0 and 5500...

Thank you for your response! I'm glad to have nice service! This error always appear and I can't boot my vm if I use 5.3 kernel. I found another one facing the same issue...

Hi! My setup is simmilar to you and I get same errors with 5.3.10 kernel. I'm using Gigabyte X570 auros elite and I cannot start my VM which gets a RTX 2070 SUPER passed through. I'll attach the full log with error below too. You can change your default kernel entry by following this article...

I searched for this error message and found https://forum.proxmox.com/threads/bug-unable-to-handle-kernel-paging-request.52792/. I can't understand what is going on but I tried memtest86 but just after I selected memtest86 in grub the screen will black out.

Thanks! I removed that line and it worked! (also cpu hidden=1) I struggled and followed some old articles... Sorry I didn't look carefully but there were error messages in dmesg. [ 572.327056] xhci_hcd 0000:09:00.2: remove, state 4 [ 572.327059] usb usb6: USB disconnect, device number 1 [...

Sorry I didn't look carefully there were error message in dmesg. [ 572.327056] xhci_hcd 0000:09:00.2: remove, state 4 [ 572.327059] usb usb6: USB disconnect, device number 1 [ 572.327461] xhci_hcd 0000:09:00.2: USB bus 6 deregistered [ 572.327465] xhci_hcd 0000:09:00.2: remove, state 4 [...

It didn't work on 5.3 TASK ERROR: start failed: command '/usr/bin/kvm -id 100 -name win10-base -chardev 'socket,id=qmp,path=/var/run/qemu-server/100.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' -mon...

qm show <vmid> /usr/bin/kvm -id 100 -name win10-base -chardev 'socket,id=qmp,path=/var/run/qemu-server/100.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' -mon 'chardev=qmp-event,mode=control' -pidfile...

I read too old articles... Now I removed -agrs line and it worked in pve kernel 5.0 bios: ovmf bootdisk: scsi0 cores: 1 cpu: host efidisk0: local-lvm:vm-100-disk-1,size=4M hostpci0: 09:00,pcie=1,x-vga=1 machine: q35 memory: 2048 name: win10-base net0...

lspci -k BOOT_IMAGE=/boot/vmlinuz-5.3.10-1-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on cat /proc/cmdline 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex 00:00.2...

My pc setup ===================================== host gpu: (nvidia 2070 super) guest gpu: (radeon rx 580) cpu: Ryzen 7 3700X ===================================== My config ===================================== args: -cpu host,hv_vendor_id=1234567890ab,kvm=off -machine type=kernel_irqchip=on...

I succeeded to passthrough my gpu with the following settings in proxmox 6.0 but I can't get it work on proxmox 6.1. my pc parts are as follows ====================================================================================== motherboard: x570 aorus elite gpu slot 1: rtx 2070 super gpu...

I finally succeeded to install. This is my settings in proxmox 6.0 args: -cpu host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_vendor_id=1234567890ab,kvm=off -machine kernel_irqchip=on bios: ovmf bootdisk: scsi0 cores: 4 cpu: host,hidden=1 efidisk0: local-lvm:vm-100-disk-1,size=128K hostpci0...

I finally get it work by downgrading proxmox to 6.0 !!! I didn't even need any special settings. I just followed official wiki and added gpu in gui. However the driver throw error code 43 so I'll fight with it now. Is this some kind of bug with proxmox 6.1?

Now I'm stuck in getting files ready for installation. I found that pci passthrough is more stable than pcie passthrough in my setup.

Yes I did. I'm completely lost now. Even if my settings are exactly the same, there happens different problems.

I'm sure I can passthrough in my pc setup because I've done it in ubuntu before. https://www.youtube.com/watch?v=C2jnUK4MSyE I just followed this video.

I completed install without gpu. After that I tried to change vnc to gpu and failed. Then I tried to pass gpu not as primary one but it also failed.

Sorry it didn't worked. It will stuck in bios window. I also tried to keep vnc and passed gpu as a pcie device but after that vnc screen stopped working.

Thanks! Your my savior! I'll try it now!