Search results

That sounds like it may be safe that, when I pause a VM, do fstrim and unpause the VM afterwards?

Hi, is it possible and safe to trim/discard a VMs filesystem from outside(proxmox host) while the vm is online? I have some non-fstrim-enabled VMs on a proxmox host with lvm thin provisioning and I want to fstrim the vms filesystem regularly. So I thought I shutdown the VM and mount the VM...

Ok. Seems it is a typical PEBCAK problem: I got some information from my smartctl command, but it's not the way smartctl is to be handled with that controller. The correct command, I found out now, is: # smartctl command for the first of the controllers SAS disks: smartctl -i /dev/sg3 -d...

repositories are pve default. (enterprise repo disabled) - because this is only a testing machine.

Ok. I'll try another Controller if possible. I can not use the onboard controller of the board, because the drives are SAS-Drives.

pveversion -v proxmox-ve: 6.1-2 (running kernel: 5.3.10-1-pve) pve-manager: 6.1-3 (running version: 6.1-3/37248ce6) pve-kernel-5.3: 6.0-12 pve-kernel-helper: 6.0-12 pve-kernel-5.3.10-1-pve: 5.3.10-1 ceph-fuse: 12.2.11+dfsg1-2.1+b1 corosync: 3.0.2-pve4 criu: 3.11-3 glusterfs-client: 5.5-3...

Hi, I just checked out Proxmox VE 6.1 and was trying to do some storage benchmarks. When I want to figure out the hard disks physical sector size with smartctl, I get different values on every call: smartctl -i /dev/sdc | grep -i Phy Physical block size: 16384 bytes...

Yes. That's my experience too. It sometimes took ages to get migrations finished and often it just did not work(failed at some point). Sometimes it worked after multiple retries, sometimes it didn't.

Well the issue was long ago, so I for sure can not remember all details of the case. What I'm sure of: It was no quorum issue. I couldn't get even the quorum information out of pvecm status (That blocked too) or trying to override the quorum with pvecm expected 1 ... and I'm sure if I had...

I really like PVE a lot. It works great! However what I prefer of citrix XenServer/citrix Hypervisor/XCP-NG is the loose coupled servers. I once had a problem within Proxmox Cluster management with PVE 4.x or 5.x (not sure), some years ago: The Cluster didn't respond any more. No cluster...

Ok. Ich sehe, dass da ein 2. Task angezeigt wird mit der gleichen ID wie der erste, sobald die Migration abgeschlossen ist. Wie ich die beiden In Verbindung bringe sehe ich allerdings nicht. Ich kann natürlich einfach die neuesten beiden Tasks mit der gleichen ID und Typ "qmigrate" bzw...

Hallo, ich möchte auf meinem Cluster ein evacuate-Script basteln. Vereinfacht verschiebe ich dazu die HA-aktivierten VMs per API-Aufruf auf einen anderen Host, was im Hintergrund abläuft. Ich würde gerne wissen, wie ich sehe, wann die Migration abgeschlossen wurde. Das ist der...

When I migrate a vm from command line - initiated at the host where the vm resides - all is fine: THISNODE# pvesh create /nodes/THISNODE/qemu/106/migrate -target=OTHERNODE -online starting migration... ... migration finished successfully When I migrate a vm from command line from a remote node...