Search results

I don't think so, that is my GPU. Anyway I deleted those entries but no luck. It just doesn't want to boot from my existing Windows install. I tried sata0, scsi5 and virtio. Every time I set the passthrough disk as the boot disk. If I boot from the local-lvm disk I can see and access the passed...

Hi, How can I pass through my sata ssd with an existing windows 10 installation to a VM in proxmox? I tried following the docs but I get some mapping table on screen that shows a bunch of pciroot sata messages. conf bios: ovmf boot: c bootdisk: sata0 cores: 8 cpu: kvm64,flags=+aes efidisk0...

Hi, I installed Proxmox 6.2 and very often networking is not working. When I try to ping it says network is unreachable. ip route show has no route. The network config looks OK and if I set it to DHCP it sometimes works, but most of the time it doesn't. Same goes for a static IP. As soon as I...

Thanks. I'll do it that way then.

Thanks for the reply. I finally have some time to get started on this. Yes, the goal is to hardware passthrough the adapter to pfSense to avoid any potential issues. I did a quick test but pfsense isn't accepting the adapter when passing it through. Passthrough works on other VM's and pfSense...

Hi, I'm running Pfsense inside proxmox and I was wondering if it would make sense/is secure to cut out my modem and instead have pfsense connect directly to my isp. Current setup: ISP modem | Router | Intel NUC | LAN The NUC has a USB to ethernet adapter for WAN, and is...

Thanks, that helps clear things up :) I ended up using gparted and clonezilla to make a new image with a smaller size but I'll try copying the data next time.

Hi, I just configured a metric server on my proxmox test install to see what kind of metrics I can pull. My whole monitoring system is based on Logstash/Elasticsearch and even though the documentation mentions only Influxdb is officially supported, getting the data into Logstash/Elasticsearch...

Those links don't really answer my question? root@proxmox:/dev/pve# pvesm path local-lvm:vm-100-disk-1 /dev/pve/vm-100-disk-1 Is this the actual location of the file? Size appears to be 0 and no extension. root@proxmox:/dev/pve# qemu-img resize /dev/pve/vm-100-disk-1 – – -11GB qemu-img...

That only allows you to increase the disk size, not to shrink it. I believe you need to use the cli for that. Even if it could be done from the gui, I still want to know actually where local-lvm stores its data because its not in any of the directories mentioned in the documentation.

Hi, I'm struggling with storage and Proxmox. I got a default installation and under storage I see local (directory) and local-lvm (LVM-thin). local has /var/lib/vz as path and local-lvm has no path. The content for local-lvm is disk image so I assume every VM I create is store there. But what...

Thanks a million! working perfectly now. I really need to learn more about how Linux handles networking.

Thanks spirit auto lo iface lo inet loopback iface eno1 inet manual auto vmbr0 iface vmbr1 inet manual bridge_ports eno1 bridge_stp off bridge_fd 0 bridge_vlan_aware yes auto vmbr0.200 iface vmbr0.200 inet static address 192.168.100.240...

@spirit thanks, after trying a lot of different things I did eventually get it working with all the VLANs created on the vmbr0 interface. The only problem I have left is that I can't actually access the proxmox gui anymore because its not a member of the VLAN...

Hi all, This is topic is related to https://forum.proxmox.com/threads/how-do-i-assign-vlans.43948/#post-210768 but as its a different problem I decided to create a new topic. I'm running proxmox on a Intel NUC with 1 NIC. I'm using pfSense inside proxmox to create VLANs. Configuration...

I'm sorry spirit but I don't understand what you are saying. If I remove vlan aware and tagging from vmbr1, and remove vlan tagging on vmbr1 in pfsense, then how will the LAN be assigned to a VLAN? VMBR1 is supposed to be a virtual interface tagging all the VM's that connect to it. Also, does...

But that is exactly what isn't working. - vmbr0 allow vlan, linked to eno1 (physical nic) - vmbr1 allow vlan, tagged 100 - in pfsense just a normal static ip on vmbr0 as the wan - vmbr1 set up as lan with vlan tagging (em0.100) But the VM connected to pfsense won't receive an IP with this...

Only one NIC so I want to use VLANs so I can connect the NUC to a switch and then access the VM's behind pfSense through VLAN from a physical machine connected to the switch. I have very little experience with VLANs so my own incompetence is at work here but it is unclear to me how proxmox and...

I've got it configured like that but it doesn't work. Node pfSense VM Win10 VM pfSense VLAN Not sure because I don't understand if or how whatever it is you set there relates to the rest of the system.

Hi, I'm having problems with Proxmox and VLANs. I have pfsense running inside proxmox and I want other VMs to connect to be assigned to the VLAN by pfsense. I'm running Proxmox on a intel nuc with only 1 NIC. Pfsense config vmbr0 => bridged with eno1, assigned as wan to pfsense vmbr1 =>...