Search results

What does this have to do with the problem, or the fact that the upgrade does not upgrade a critical component? If you have nothing to do, keep on doing nothing, instead of posting useless comments. Thank you in advance.

Yes, I read it. No word of ifupdown problems afterwards. Actually before the upgrades I added the hwaddress to the config, as suggested. Still it all went wrong!

Well, since I am after 6 hours of fighting with getting my production system working, first of all many thanks to the whole Proxmox team for screwing the upgrade process up and not informing users of it! I hope karma will thank you better than I can. The story: 2 days ago I decided to upgrade my...

Hello, I am unable to upgrade my Proxmox 6.4 - get numerous Err:6 http://download.proxmox.com/debian/pve buster/pve-no-subscription amd64 libquorum5 amd64 3.1.5-pve2~bpo10+1 403 Forbidden [IP: 212.224.123.70 80] I can access these resources through the browser without problems. curl...

OK, solved it myself. You need to configure the proftpd to limit the passive ports, and then enable them on firewall. Or has anybody any other idea?

Yes, running ss -tunlp shows the proftpd port 21 listening. Running nmap returns: Starting Nmap 7.70 ( https://nmap.org ) at 2020-10-28 18:47 CET Nmap scan report for xxx.xxx.xxx.xxx Host is up (0.00024s latency). PORT STATE SERVICE 21/tcp open ftp MAC Address: XXX (Unknown) This works fine...

Of course I have rules set, including tcp 21 port enabled.

No help? No ideas? Is uefi working with proxmox at all?

No help? No ideas?

I know that. As long as I define the firewall and enable it on the datacenter and container, ftp is working. When I enable it on the vm, the traffic is blocked. Partially, as logon gets through.

Hello, I have 6.1.3 version. I enabled firewall on datacenter, container and a vm machine, run modprobe ip_conntrack_ftp but still the ftp is not working. Opened the macro ftp. I read some forums that you have to enable ports 34000:65535 and did that, I still receive: 101 3 tap101i0-IN...

Well, I solved it. Turns out somehow after restoring backup the usb-modeswitch software is lost and needs to be installed. Looks like a bug to me.

Hi, Migrated proxmox to a new server. Have a vm that uses usb modems. Migrated this vm as well, selected apropriate new usb device. The lsusb lists this device, however no /dev/ttyUSB device is created or available. As not an expert I need support on that. And quickly, if possible. Thank you...

OK, done. Works on Dell R620 as well. Thank you.

Hi, When I call the gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F I get error: gpg: Keyserver receive failed: Server indicated a failure changingto hkp:// and port :80 also does not help. Any help?

Yes, of course. The partitions are there, the boot config data is also there.

OK, I have no idea, what is going on. First - in Linux Debian vm tried to convert a disk from mbr to gpt, done it, added efi hdd to vm. Everything went smoothly, uefi bios starts, there is an option to select the scsi hdd in boot, does not start. Second - created a full new vm with uefi bios. A...

Thank you! I will check. How does it look when a drive fails under zfs. Is this relatively easy to replace it without data loss? I have read one needed a procedure to perform such a replacement in the past. Hardware raid with hot swap drives is a piece of cake in this respect...

Thank you. As far as I can see the software raid option is not possible as I have a controller without the passthrough option (IT mode). There is some flashing possible, but do not want that. Any other comments highly appreciated!

Hello, In the days of old the standard was to have a separate hardware raid for the os and a separate hardware raid for data. Now with virtualization I do not find much info about raid scenarios for proxmox. I have a server with 8 hdds, raid controller, 16 cores and 382gb of ram. Planned is a...