Search results

  1. I

    [SOLVED] Job networking.service/start running (12min / no limit)

    Hello, Today we have decided to upgrade our proxmox from version 7 to version 8. After upgrading the server has been blocked giving those messages of the screenshot. We have tried to start in recovery mode and the server stays in the title step and does not continue.
  2. I

    server upgrade recommendation

    Hello, This is our installation: - 3 Supermicro servers (https://www.supermicro.com/en/products/chassis/2U/825/SC825TQ-R720LPB) - Each server has two 4TB Western Digital Red HDD disks. - We use Ceph for which we have a 10G fiber optic network with a cisco switch. We are new with proxmox/ceph...
  3. I

    [SOLVED] Windows 10 Vm does not start after cepth upgrade

    Hi, We are running proxmox 6.4-15 and today we are working to upgrade it to 7.X. We have 3 servers with ceph. First we upgraded Ceph to Octopus and now we realized that one VM with Windows 10 is not starting. This is the VM config: agent: 1 balloon: 8192 boot: cdn bootdisk: virtio0 cores: 4...
  4. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    yes they started normally. All is working again.
  5. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    I found the problem!. The fact is that the server is a HP Microserver Gen8 and I forgot that I have a USB hard drive with a grub to make boot from a ssd. I restored it and now is working ok ➜ ~ pveversion -v proxmox-ve: 7.1-1 (running kernel: 5.13.19-2-pve) pve-manager: 7.1-8...
  6. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    and here the output from find /boot is larger than 1500 rows so I did a pastebin https://pastebin.com/aPKsi5mR This is the /boot/grub/grub.cfg => https://pastebin.com/Y3N2CzZc
  7. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    ➜ ~ proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. E: /etc/kernel/proxmox-boot-uuids does not exist.
  8. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    here it is # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo...
  9. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    I executed ➜ ~ efibootmgr -v EFI variables are not supported on this system. So if I understand correctly it means that Grub is being used. Now, how can I fix my problem? I try update-grub and reboot but still not working
  10. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    yes. I rebooted the system 2 times. I'm going to try to shutdown and start again but...
  11. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    yes I did reboot. This is the output: ➜ ~ pveversion -v proxmox-ve: 7.1-1 (running kernel: 5.4.128-1-pve) pve-manager: 7.1-8 (running version: 7.1-8/5b267f33) pve-kernel-helper: 7.1-6 pve-kernel-5.13: 7.1-5 pve-kernel-5.4: 6.4-11 pve-kernel-5.13.19-2-pve: 5.13.19-4 pve-kernel-5.4.157-1-pve...
  12. I

    [SOLVED] VMs not starting after proxmox 6 to 7 upgrade

    Hi, I just upgraded my proxmox 6 to 7.1 without errors but now no one of my VM is starting. I see "Booting from Hard Disk...." and is stuck there. I just created a new VM (next next next) with Ubuntu iso and happens the same. this is the vm config: boot: order=scsi0;ide2;net0 cores: 2 ide2...
  13. I

    VM as readonly. Why?

    this is the output of fsck /dev/vda2 Two days in a row happening the same. any help with this¿?
  14. I

    VM as readonly. Why?

    Hi, This is our setup: 3 Servers with proxmox 6.3.3 in HA and Ceph. For Ceph's corosync we have a dedicated VLAN and 10G switch. All our VM disks are in the ceph shared. The problem is that suddenly some vm-s detect filesystem errors and mount it as readonly. We have to manually fsck the disk...
  15. I

    [SOLVED] Container not start after upgrade

    Thanks, it is working now. I think I'm going to rebuild it from scratch after backup everything. thanks!
  16. I

    [SOLVED] Container not start after upgrade

    I created a new CT (8Gb) and in the creation log I see The ct is created correctly but it's not starting:
  17. I

    [SOLVED] Container not start after upgrade

    Hi 222 is not a contianer, is a VM.... I expent some time with my coworker and he told me that he resized the pve-root partition and errors come since then. I checked the history file and see 475 pve5to6 476 fdisk -l 477 e2fsck -f /dev/mapper/pve-data 478 ls /sys/block/ 479...
  18. I

    [SOLVED] Container not start after upgrade

    hi, here I go: ➜ ~ lsblk -f NAME FSTYPE LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda zfs_member ├─sda1 linux_raid_member 879004fa-7005-3ac9-3017-a5a8c86610be ├─sda2...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!