Search results

Thank you for this suggestion!

Hello, I have not noticed any S.M.A.R.T. failures with my Samsung 990's. I also have not upgraded the Samsung 990's firmware. But here is the firmware version fwupdmgr get-devices provided: You might be able to use fwupdmgr to update the firmware but I cannot say for certain.

Hello, ZFS has been running very well on the Samsung storage devices! I've not burnt out any drives and the I/O latency is not an issue anymore.

I run pfSense as a VM on PVE as my main firewall, been doing this for years and it works great. I create VLANs for my VMs if needed and setup the firewall rules in pfSense.

Guess we will see, I have another NUC using: Crucial P2 2TB 3D NAND NVMe PCIe M.2 SSD Up to 2400MB/s - CT2000P2SSD8 (ZFS RAID 1) Crucial BX500 2TB 3D NAND SATA 2.5-Inch Internal SSD, up to 540MB/s - CT2000BX500SSD1 (ZFS RAID 1) for about 1.5 years and no issues. Is there an equivalent M.2...

Just an update, I ended up purchasing both: SAMSUNG 870 EVO 2TB SATA III SSD (MZ-77E2T0B/AM) Samsung 990 PRO Series - 2TB NVMe 2.0c - M.2 (MZ-V9P2T0B/AM) I received the Samsung 870 EVO SSD yesterday, installed it, resilvered my ZFS pool and it made a huge difference already! Now I'm only...

There's no data redundancy installing Proxmox on 1 storage device and the VM's on another. My current installation using 2 storage devices in ZFS RAID 1 at least allows one storage device failure without data loss. I'm running a VMS server for my security cameras and a media server (PLEX) so I...

At this point I'm desperate to get this working correctly so I'm willing to purchase new storage devices if it would eliminate this issue permanently. I assume this is a really bad fsync rate? root@proxmox2:~# pveperf CPU BOGOMIPS: 79872.00 REGEX/SECOND: 7026403 HD SIZE...

Thanks for the info! Are these the Micron storage devices you are referring to and should remedy my issue? Supermicro (Micron) 1.9TB U.3 7mm 7450 PRO NVMe PCIe 4.0 (Will this work with a SATA connection?) Supermicro (Micron) 1.92TB M.2 22x110mm 7450 PRO NVMe PCIe 4.0

Thank you for the reply and information! I'm not opposed to using Enterprise/Data Center SSD's but would I need to replace both my SATA SSD and NVMe PCIe M.2 with an Enterprise/Data Center version or just the SATA SSD? I was assuming the SATA SSD is the bottleneck? I was thinking the 2TB...

Hello everyone! I'm experiencing high IO delays (18% - 30% and sometimes higher) when I start a Windows 11 Pro VM on Proxmox VE 7.4-13. I suspect it might be caused by running everything on a ZFS RAID 1 storage but then again I do not experience high IO delays when I run a Linux VM...it's only...

Wow! That did it and I really appreciate the help!!!! That's crazy though, I actually power cycled the NUC several times by unplugging it but didn't think to unplug, hold down the power button and let it sit for a while to drain everything like you said. I'm running the latest firmware on the...

Hello everyone, I recently installed Proxmox Virtual Environment 7.3-6 on an Intel NUC 12 (NUC12WSHi7). Installation was successful except I could not get the onboard NIC to work...no lights or anything after Proxmox was up and running. Using the same network cable and switch port I get a...

Hello everyone, I installed Proxmox (7.2-4) using ZFS (RAID1) and one of the two drives have failed. I thought Proxmox would use both entire disks for the ZFS rpool during the installation but it appears Proxmox created three partitions and included only one partition in the ZFS rpool. With...

I have two Linux Bridges: vmbr0 (enp2s0f0=LAN) and vmbr1 (enp1s0=WAN) so added this in /etc/network/interfaces: iface enp1s0 inet manual pre-up ethtool -K $IFACE rx-checksumming on pre-up ethtool -K $IFACE tx-checksumming on pre-up ethtool -K $IFACE tx-checksum-ip-generic on...

Hello everyone! I've had to make several configuration changes using ethtool in order to increase my network performance in Proxmox 7.1-10. What is the preferred method to make ethtool changes permanent so they will persist across reboots as well as updates? Here are the changes I made using...

Yes, you are right! I may have spoke too soon as ASRock responded to my email. They were closed celebrating Chinese New Year...I forgot about that. ASRock stated they installed Proxmox 7.1 on a NUC BOX-1165G7 in their lab and will be testing it. So it's possible they may find the problem and...

Proxmox seems to work very well with the ASRock 4X4 BOX-4800U AMD Ryzen. I'm disappointed in ASRock's customer service as they have stopped responding to my emails. In conclusion, I would say ASRock's release of the NUC BOX-1165G7 is premature and that's why I was not able to use a...

Just heard back from ASRock: 'Thank you for contacting ASRock IPC Technical Support. Regarding your question, we have tested NUC BOX-1165G7 in our lab. The system could run Linux Ubuntu 21.04(Kernel 5.11) without any problem. NUC BOX-1165G7 is Intel Tiger Lake Platform, and it requires at...

You read my mind! I was just looking at one of these. It's on Amazon so I'm going to order it and see what happens. I'll post the results after some testing.