Search results

@Neobin thanks so much My LXC CT starts fine now. Thanks so much again.

Hi everyone, I have upgraded PVE v6.4 to PVE v7.2-7 and all works fine except LXC that I have. When I try to start the LXC container: ---------------------------------------------------------------- root@proxmox:/etc/pve/lxc# pct start 120 WARN: old systemd (< v232) detected, container won't...

Hi again. I had done the following: - I have shudown the KVM VM. - On the Disk of the VM I have actived the Discard option. - I have started the KVM VM. You tell me that I need enter in the VM and execute the "fstrim" command but the S.O. installed in the VM is FreeBSD and this command not...

Dominik, thanks so much by your answer. The original VM is th VM750 and the VM751 is the cloned. - The configs of the KVM VM: # qm config 750 balloon: 0 bootdisk: scsi0 cores: 2 cpu: host ide2: none,media=cdrom memory: 2048 name: pfSense-CASA-01 net0: virtio=E6:9F:61:80:C9:6A,bridge=vmbr0...

Hi everyone, I have create a KVM VM and clone it to create another identical VM to mount a cluster. Both have a 15Gb disk and 1Gb used. Well, when I do a Backup of both, the backup file of the first VM that I have create have 3.5Gb approximately and 500Mb the other backup file. Can anybody...

Fabian, very thanks. But I am searching where saves PROXMOX, if it saves, all error messages that appear in Console when it starts. I have googled a lot but I don't find where saves this errors messages or how to configure PROXMOX to save this messages. Any idea...? Best regards, Ramses

OK LnxBil, very thanks

Hi everyone, I need to change temporally the date to a LXC Container but when I execute the command "date -s 2018-03-01" it show me this error message: ----------------------------------------------------------- root@test:/# date -s 2018-03-01 date: cannot set date: Operation not permitted Thu...

Sorry by my late response. Very thanks by the anwers. For example: For test purposes, I have needed to install a software that check if the machine have 10Gb of memory. Later the software works well (for test purposes) with less memory, not use all memory, but to install it checks the memory...

Hi everybody, In some situations, for test proposites, I need create some VM / CT that require to install a software more resources that the physical PROXMOX Server has. Only for test proposites not for production... Can I do this? Need I increase the swap or anything in the PROXMOX Server...

fireon, the startup error messages that appear are like these: ----------------------------------- /sbin/modprobe failed: 1 Can't process LV pve/data: thin-pool target support missing from kernel? Can't process LV pve/vm-100-disk-1 thin target support missing from kernel...

fireon, very thanks by your answer. During the startup appear some errors with modprobe module and the LV's of the VM / CT that not appear when I execute these commands. Can I loging all startup messages in any file to review later? Regards, Ramses

Hi everybody, When I start the PROXMOX Server shows some errors during the startup process. I am lookup the file that can contain these messages but I can't found. In messages not appear, in syslog neither, etc... Does PROXMOX loging this startup messages in any log file? Regards, Ramses

Yes, I know that I can storage a ISO of a DVD in the PROXMOX Server and start the VM from him but I am seeing posibilities, doing tests and studying different options. I am going to have a look to Spice. @LnxBil with Spice can I start a VM from a remote USB DVD? Regards, Ramses

Hi everyone, I need know if anybody can tell me if I can mount a DVD connected in a remote Windows/Linux PC as a Virtual Local DVD in PROXMOX that I can use in host system and VM's / CT's to install software. Regards, Ramses

Hi everybody, I have two DVD installed in a PROXMOX, one intenal SATA DVD and the other vía USB. I want install Windows 10 in a VM using the physical DVD. Both DVD's are recognized by the PROXMOX system: ------------------------------------------------------------- # dmesg | grep dvd [...

dietmar, very thank by your answer. Yes, in the "/dev/pve/" appear all disk of the VM's and CT's: -------------------------------------------------------------------------- # ls /dev/pve -la . . lrwxrwxrwx 1 root root 7 Feb 17 19:18 vm-100-disk-1 -> ../dm-6 lrwxrwxrwx 1 root root 8 Feb...

@JesusM my problem wass that when I upgraded the server, I only had in the source.list file this content: ----------------------------------------------------- # debian updates deb http://ftp.es.debian.org/debian stretch main contrib # security updates deb http://security.debian.org...

dietmar, thanks, yes, there is defined a lvm-thin storage. And can you or anybody tell me how I can access to the files of this storage? By example, if I need copy the raw disk of a VM or view the content of a LXC CT that not start. Regards, Ramses

Hi everyone, The PROXMOX 2.2-31 storages the VM's and the CT's in: /vz/private/<CTID> /vz/images/<VMID> But can anybody tell me where storages PROXMOX 5.1 the VM's and CT's LXC? Regards, Ramses