Search results

Re: Proxmox 3.3 + vSWITCH + BOND + VLAN [SOLVED] Hi Spirit, Yes, I applied port-channel on the port-channel and port-channel members. Also, I have 2 trunk-ports configured. It's working alright. Thanks for all you support!! :)

Here's the config for port-channel. interface GigabitEthernet0/24 description ***TRUNK PORT TO PROXMOX SERVER*** switchport trunk allowed vlan 10,100,125 switchport mode trunk channel-protocol lacp channel-group 1 mode active I only need the port-channel config to the TRUNK PORT right...

Here's the cisco config: interface GigabitEthernet0/24 description ***TRUNK PORT TO PROXMOX SERVER*** switchport trunk allowed vlan 10,100,125 switchport mode trunk ! interface Vlan1 no ip address no ip route-cache ! interface Vlan10 ip address 192.168.3.3 255.255.255.0 no ip route-cache...

Yes, I rebooted the server and have seen all the interfaces to come up except vmbr1, which I have to manually activate. root@prox10:~# ovs-vsctl show 2cef8468-d63f-4b9c-ab02-5d7fdaa56550 Bridge "vmbr1" Port "vlan100" tag: 100 Interface "vlan100"...

Hi Spirit, I was able to create an exact config output (the one you created) but this time using the GUI. However, I still can't access the Proxmox server from a directly connection host. This made me wonder, is the config made to allow a host to access the Proxmox Server on Web Management IP...

You need to partition the lvm to provide a filesystem like ext4, xfs etc. before you can add that disk to the vm. HTH

Hi, I'm using 3.10 kernel. And all interfaces are working with linux bridges. In fact, I just switch config to linux bridging everytime I will have to copy the config and copy command results to you. I'm also sure that eth0 and eth1 are correct interfaces. In fact just to be sure I'm using...

Hi Mate, Sorry, but it is still not working. I can't establish any connection to the server both on switch and crosscable. Here's ovs-vsctl show output 350c05df-e373-4a69-b1f0-e094549f79e0 Bridge "vmbr10" Port "vmbr10" Interface "vmbr10" type: internal...

Hi Spirit, Thanks for your reply. Here's the result you are asking. #ovs-vsctl show 08a7aa09-8b54-489f-bbc4-8930b9926a6d Bridge "vmbr0" Port "vlan10" tag: 10 Interface "vlan10" type: internal Port "bond0" Interface...

Thank you for the illustration. Now it's getting clear to me how it's working. :) 1. Yes, I wan vmbr100, vmbr10 to be used by my vms. If possible vmadmin as well. 2. And I could say yes, it's not necessary to define vlan in proxmox qemu/openvz vm NIC. For the posted config, it still won't...

Hello Spirit, Firstly, thank you for taking time to answer. Here's my working setup for linux bridge. # network interface settings auto bond1 iface bond1 inet manual slaves eth2 eth3 bond_miimon 100 bond_mode 802.3ad bond_downdelay 200 bond_updelay 200...

Am I wrong to conclude that the assigned IP to VLAN125 can be used for proxmox management? Or that I can access proxmox at VLAN125 as if it was a physical Interface of proxmox? I also assume that I can assign those vlans to my VMs to establish networking. I'm still not able to establish any...

Hello brad_mssw, I can't thank you enough for your effort to answer my post. Now I have seen all the interfaces ACTIVE, eth0 eth1 vmbr0 bond0 and vlan125 having the right IP. BUT I DON'T SEE THE BRIDGE (vmbr0) INTERFACE, is this a normal behavior. And, I still cannot establish a connection to...

Hi brad_mssw, Thank you so much for taking the time to explain and sharing the configs. However I tried to implement what you posted with only a few modification, but I can't seem to make it work. No matter how I tried it failed. I'm not sure why. Some of the problems where: 1. All the...

Hi, I have a problem configuring BONDED VLAN using vSwitch on Proxmox 3.3. I can see all the interfaces as ACTIVE and ifconfig indeed show that they are up and running. I have searched thoroughly Proxmox site and Googled for a couple of days but did not find exactly what I'm looking for...

Could you please provide us with example on how to achieve this? This is very confusing. I've been working with this for 2 days now and still can't make it work. Here's the steps I followed. 1. Created a vSwitch Bond1 (GUI) 2. Created a vSwitch Bridge vmbr1 (GUI) edit /etc/network/interfaces...

I still haven't resolved the issue as indicated above. Can the Moderators confirm if the configurations were defective/incorrect? Please point me to the right track. tks

Hi, I followed the wiki in creating VLAN and Bonded Interface by Michael Rodriguez in http://pve.proxmox.com/mediawiki/index.php?title=Vlans&oldid=4655 And I came up with the following /etc/network/interfaces: After I restart the network I got this error: ERROR: trying to add VLAN...

Hi Admin I have the same problem with Proxmox VE 2.2 on HP Proliant DL360 G7 server. The newly installed proxmox don't have any network connectivity in any devices (cisco switch, pc). I installed two instances and I can confirm both have the same problem. I wonder if the original poster...

Hi Admin, I experienced the same with Proxmox VE 2.2 and HP Proliant DL360 G7. The proxmox server has no network connectivity to any devices (switch, other nodes). I installed promox in two different Proliant DL360 G7 server but same problem occur. I wonder if the poster was able to...