I pass thru GPU gt1030 successfully before and can see BIOS screen when startup VM, today replace my CPU from 200ge to ryzen 5500 and also works well first time boot automatically.
After I change VM cores from 4 to 12 then boot again, no BIOS startup screen and HDMI output not work, the guest...
I installed docker-ce and running a container listen 0.0.0.0:1080:80
ss -tlunp | grep 1080
root@pve:/opt/speedtest# ss -aon | grep 1080
tcp LISTEN 0 4096 0.0.0.0:1080...
Seems I solved this problem
apt install dwarves
apt install pve-headers-5.11.22-1-pve/now build-essential dkms
cp /sys/kernel/btf/vmlinux /usr/lib/modules/`uname -r`/build/
#install by compile
make
make install
mkdir -p /lib/modules/`uname -r`/kernel/net/usb
cp /root/r8152-2.15.0/r8152.ko...
I tried install https://www.realtek.com/en/directly-download?downloadid=14693064993b470514fcf9f45f2442e5
It's RTL8156 2.5G USB ethernet driver, because I use lsusb got:
Bus 004 Device 005: ID 0bda:8151 Realtek Semiconductor Corp. RTL8151 Adapteon Business Mobile Networks BV
the device ID is...
Skipping BTF generation for /root/r8152-2.15.0/r8152.ko due to unavailability of vmlinux
it's searching /lib/modules/$(shell uname -r)/build
I alrady installed header file pve-headers-5.4.128-1-pve
and there is /sys/kernel/btf/vmlinux, should I use this one?
Anyone can help me?
The usb address changed automatically:
this works well:
01:1b.0) hub
|__2-1 0bda:8156:3000 00 3.20 5000MBit/s 512mA 1IF (Realtek USB 10/100/1G/2.5G LAN 000000001)
but this not work:
01:1b.0) hub
|__2-1 0bda:8151:3000 00 3.20 5000MBit/s 512mA 1IF (Realtek USB 10/100/1G/2.5G...
PVE 7.0 and faced this problem times ago, but I just fresh install to resolve
But it happen again, the screen froze, see attathment, something like:
failed to open Intel firmware: intel/ibt-hw-37.xxx
I use live CD also got these two bluetooth errors,
When I use boot recovery mode, I got:
A...
I removed mannualy config for network interface, such as IPV4 address and default gateway and apply config
Now my PVE lost connection, how to recover it?
I installed pve-headers mannually by dpkg -i pve-headers-5.11.22-1-pve_5.11.22-1_amd64.deb
Now I can install drivers
Check old driver and unload it.
Build the module and install
Skipping BTF generation for /root/r8125-9.006.04/src/r8125.ko due to unavailability of vmlinux
Warning...
Download from realtek
I install by run setup.sh but got
Check old driver and unload it.
Build the module and install
make[2]: *** /lib/modules/5.11.22-1-pve/build: No such file or directory. Stop.
make[1]: *** [Makefile:184: clean] Error 2
make: *** [Makefile:48: clean] Error 2
The first time device is 0bda:8156 and I pass to VM can use this USB device successfully,
But sometime, device id change to 0bda:8151 automatically as bellow, the original USB device not recogonized in VM
How to pass USB device in this situation?
I tried pass by port, after reboot, device...
Yes, I just know Intel platform is better for passthrough.
Anyway, I can use music player daemon on PVE that works well for me, which is a better choice that I can use app to control it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.