Hi
I tried to configure a point to point connection with a 10G Fiber between PVE Host and PBS.
PBS IP: 10.10.10.2/24
PVE Host IP: 10.10.10.1/24
Adding the PBS to PVE Host worked without problems, but if I want to get the Backup then it comes to high I/O delay on the PBS.
Any suggestions...
Hi,
I have installed the latest proxmox version 8.0, unfortunately the backup doesn't work. After 5% NFS or SMB cannot respond. This means that the VM is completely busy and Proxmox VE has no connection to the NFS or Samba/Cifs backup.
I did all Upgades on Proxmox but it didn't help.
PVE...
Hi guys
Unfortunately, I've been having a problem for some time and don't really know what to do next. It seems that the qcow2 disk is defective, a Windows Server 2012 R2 is running on this VM and is used as a domain controller.I don't dare upgrade the system because I don't know whether it...
After I replaced a Disk in failed state, the Pool didn't resilver the Pool like it should. After a restart, the Proxmox Backup Server can't import the pool by him self.
I tried with "zpool import Proxmox-Backup01" and it comes the output: invalid exchange (attached)
With "zpool import...
Hi guys
Does someone now how to restore a Windows Backup the easiest way on a Proxmox VM?
I tried it with a Windows-CD and then repair Options with the Repair functions. There I can search my storage over Network,
it asks always for a username Password, but it's open for all on the Samba.
Thanks
What is the best compression Option and ashift size for the Koxia KCD6XLUL3T84 NVMe SSD?
Suggestions and, if need be, best-performing settings would be very helpful. Thank you very much
Does anyone have experience with Terminal Server 2019/2022 on a current Proxmox version?
What about the performance and stability of the service? And is it smart to set up a terminal server on Proxmox?
thanks in advance
Hi Guys
My root filesystem on my Proxmox-Backup runs out of space. What can I do?
ERROR: Backup of VM 100 failed - VM 100 qmp command 'backup' failed - backup connect failed: command error: write failed: No space left on device (os error 28)
Hello Dear Members
Does anyone had this issue, Controller is down;will reset: CSTS=0x3, PCI_STATUS=0x10
Here the printscreen:
I have two Samsung 980Pro M.2 in a 2.5'' Case, Proxmox is installed as an RAID 1 ZFS (System-Pool). But maybe my Supermicro Server doesn't like this constellation...
Does anyone know how to test the benckmark on a ZFS-Pool? And how can I test it on a Linux VM and Windows VM?
In this PDF I saw the command has been used: https://www.proxmox.com/de/downloads/item/proxmox-ve-zfs-benchmark-2020
command: fio --ioengine=libaio --filename=/dev/sdx --direct=1...
Does anyone know how I can troubleshoot this problem?
Our Server is a new Super: https://www.supermicro.com/en/Aplus/system/1U/1124/AS-1124US-TNRP.cfm
Is this a problem with the NIC? I tried to troubleshoot it like on this post...
Dear members
I would like to set up my server with Proxmox VE. I want to install the Proxmox host on a separate system disk (Samsung 860 500GB) and create a ZFS Raid 10 pool on 4 x 2TB Samsung 860 for my VMs.
My question is: How can I get the correct hard drive alignment and perfect...
I installed Proxmox on my server, after shutting down the whole server, it could no longer boot on the NVMe. Then I ran the Proxmox installation again. Unfortunately, I get the following error message when mounting from the backup disk.
Error Message: create storage failed: mkdir /dev/sde: File...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.