My SATA controller is in it's own IOMMU group, Currently there are 2 SSD's connected on the board (HP Elitedesk 800 G5).
IOMMU group 4 00:14.2 RAM memory [0500]: Intel Corporation Cannon Lake PCH Shared SRAM [8086:a36f] (rev 10)
IOMMU group 5 00:16.0 Communication controller [0780]: Intel...
Hi,
I passed through the SSD's using the official tutorial.
Here is the VM configs:
I am getting the following error when try to enable Trim:
Error: Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/middlewared/job.py", line 355, in run
await self.future...
Hi,
I have the following two NVME's:
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme1n1 259:0 0 931.5G 0 disk
├─nvme1n1p1 259:1 0 1007K 0 part
├─nvme1n1p2 259:2 0 1G 0 part /boot/efi...
Hi,
I am thinking to add 2 mini pc nodes with dual NICs and create my first ever proxmox cluster.
I am already running pfSense on my single node.
to do HA on pfSense, you need a sync interface. This would mean that I need 3 network interfaces: WAN, LAN and Sync
Since I have only 2 NICs...
Hi,
I have a 10Gig card with 2 NICs
I created the Linux Bond using these 2 NICs and then created a Linux bridge on top of this bond as shown below:
I am using this bond0 as a LAN in pfSense by creating the Linux Bridge (vmbr1).
pfSense recognises this interface (vmbr1) as 10 gig as shown...
Hi,
A possible stupid question but I would ask anyway...
I have one proxmox node running Tesla P40 GPU.
I recently bought a Tiny PC that I am planning to run Proxmox on and join as a cluster.
Can I pass Node 1's GPU to any VM's that I build on Node 2 (Mini PC)?
I do have Nvidia's Grid license...
Hi,
I was thinking to check out the WHONIX on proxmox.
They have a KVM install.
I was wondering if anyone already has tried setting it up and if there are any tips on setting it up?
Cheers
Hi,
My system crashed and had to re-install proxmox.
My existing VM's were stored on a different disk as shown below:
I wish to restore those VMs using these `raw` files.
I have created a VM with the same `VMID`
I tried to attach those raw files to it by:
qm importdisk 201...
Hi,
Here is the template I created for RockyLinux Cloud Image: Rocky-9-GenericCloud-Base.latest.x86_64.qcow2
agent: 1
boot: order=ide2;scsi1;net0;scsi0
cipassword: test
ciuser: my_user
cores: 4
ide2: none,media=cdrom
ipconfig0: ip=dhcp
memory: 2048
meta: creation-qemu=7.1.0,ctime=1676200961...
Hi,
I have a windows VM running with Nvidia vgpu profile.
if I do hidden=1, the VM loads but Qemu guest agent doesn't work I think because I can't see it getting an IP address. And because of this problem, I can't use parsec/moonlight to login to the machine.
Any ideas how to hide the fact...
Hi All,
I just received a HGST SN260 3.84T enterprise NVME to host VMs within Proxmox.
How do I connect it to Proxmox? What would you recommend?
A directory mount or LVM-THIN or something else??
What's your favourite?
thanks
Hi,
I am unable to take a backup of my pfSense VM. About 50% and it throughs the error:
INFO: starting new backup job: vzdump 100 --storage backup --compress zstd --notes-template '{{guestname}} deploy to local-lvm' --remove 0 --node pve --mode snapshot
INFO: Starting Backup of VM 100 (qemu)...
Hi,
I am trying to download Nvidia vgpu drivers. There are quite a few available for different Linux KVM versions.
How to find out KVM version for proxmox so that I could download the right versions for my proxmox?
Thanks
Hi,
I am creating z ZVOL to pass it as an iSCSI device to proxmox so that I could create windows/linux VMs on it.
As we know that ZVOL volblocksize (if you get it wrong) can cause padding overheads as well as performance hits!
I know, if you wish to run a VM with EXT4 or NTFS, It doesn't...
Hi,
I have a 1TB SSD. If I use the default installation using the whole drive then it assigns 100GB to local partition, where I could only upload the ISO images and container templates. And the second partition local-lvm is the remaining 800GB for VMs.
I think 100GB for ISO images it too much...
Hi,
My Cisco Layer 2 managed switch with default VLAN1 = 192.168.1.254
My proxmox static IP = 192.168.1.5 with default gateway 192.168.1.254
My server iDRAC static IP = 192.168.1.245
My laptop connected to Cisco switch via Ethernet = 192.168.1.12 with default gateway 192.168.1.254
My switch...
Hi,
I have more than 6 NICS in my server. Is there a possibility to create LINUX BOND for LACP at the installation stage or add it after the installation for vmbr0?
I tried but it says the default gateway already exists on vmbr0.
Any ideas on how to achieve this?
Cheers,
Hi All,
I already have setup LACP between my Cisco Switch and the Dell R720 running Proxmox. This LACP is VLAN aware and can carry VLAN20,30 etc. traffic.
I also have some spare NICs on my server and on the Cisco switch, therefore, I now want to setup Security Onion.
This is what I want to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.