Search results

I would not use proxmox directly for this - exposing your hypervisor directly is not ideal, and you can reverse the setup so that one of your VMs acts as the firewall/etc and keep proxmox on the inside. The video you referenced seems to talk about a single external IP rather than a routed /28 -...

It would probably make sense to create a new thread - this issue was related to the boot device and kernel from 5.x, rather than an upgrade from 5.x to 6.x in general. I upgraded my home cluster from 5.x to 6.x (from memory) without any issue.

I've got my SSD configured as an SLOG, and it's barely getting any I/O through it in normal operation - my PVE cluster doesn't seem to do much sync writing - but that is what your test is based on. Running that command on my machines gets: HOST1 (NVMe slog, JBOD underneath): 215k IOPS HOST2...

That does sound like there is a zfs issue - can you run the following commands and show the output? zpool status zfs list ls -la /dev/<poolname>/ ps -ef | grep zfs dmesg With that info, someone here may be able to spot's what going on. I know I've had to reboot a couple of times to get ZFS to...

Not yet, I keep forgetting when I'm somewhere with access... OK, just did that and the only VM I still have replicated migrated at 700MB/s instead of 640MB/s. :) Given that it only has 2GB of RAM allocated, it still only takes a couple of seconds - and the outage is still sub 100ms. I've done...

Probably because the destination is a G8 microserver... Poor little thing.

Have you checked whether your storage subsystem is the problem? If you install iperf3 on both nodes, you can run that to get the raw throughput information out of your network connection and find out whether that is the issue - try with both single and parallel streams to verify whether the...

From those output, you have configured: vmbr0 x.71.205.143/29 (network x.71.205.138/29) Which looks to be a typo - a /29 network would be x.71.205.128 Default route via x.71.205.142 So - proxmox is on .143, and the gateways is on .142. Given that the network is a /29, you will not be able to...

Hi, has there been any update on using client certificates? I, like others, have proxmox behind haproxy using client certificate authentication - it works fine using chrome on my phone (client cert is private CA and has been loaded into the Android keystore, the server certificate is...

That package list definitely includes the newer kernel - that looks like it has booted using an old 5.x kernel using the 6.x root filesystem. As a first step, I would check the boot order (make sure it is booting off the SSD rather than the PERC). If you don't mind reinitializing the whole...

Hi, I have a 3 node cluster (not particularly high spec nodes) that keeps giving me zfs snapshot timeout errors (according to my grafana graphs it is about 1 failure every 30 minutes). My configuration is set to replicate a subset (about 15) VMs/containers every 5 minutes, and therefore there...