Search results

Wow, didn't realize it was the upgrade that did that. Was working on sr-iov passthrough for the ethernet 10g and thought I had ruined my config. Thanks again.

@aaron Here is the dmesg output. I tried to blacklist the fm10k driver (but still shows up for some reason...blacklisted uio and fm10k...LMK if this is the right approach) [ 2.394015] pci 0000:01:00.0: [15b3:1019] type 00 class 0x020000 [ 2.394252] pci 0000:01:00.0: reg 0x10: [mem...

You got me inspired to install PVE 7. What is the right way to clear out the installed drivers and then upgrade to PVE 7? Or will the new built in Kernel drivers just supercede anything there?? Let me also check dmsg Thanks and appreciate the help! BY

Some background, I installed the Debian version 10.5 basic drivers from the Mellanox site (via aptitude). It appears to talk to the device properly, but missing a port.

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 3: enp70s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 9000 qdisc...

Hi, I have the following card (ConnectX-5 Ex VPI Adapter Card), and while having two ports, only one is shown as active, also it shows that the mlx5_core driver only loads for one of the PCI devices (both are showing properly). The below is more detail after running: mlxconfig -d...

Hi, got a Samsung 1735 and 1725b. Want to pass through namespaces on these drives, but haven't been able to find the commands or steps to create the functions to pass through the drives. I have been able to create the NVME namespaces, and also have configured SR-IOV on the NIC cards so SR-IOV...

Very good, thanks for the detailed reply. Learned a bunch.

Hi, Tried searching for the above but no hits so figure I'd ask. Please point me to an article I may have missed if its been answered before. The issue I'm trying to solve is high IO delay when moving large volumes (GB range) of data on a LXC ubuntu container. I previously had this issue on...

Confirmed it worked for me as well. Nvidia GTX 1650 Ti, adding "args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_vendor_id=proxmox,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,hv_synic,hv_stimer,hv_tlbflush,hv_ipi,kvm=off'" as above. Thanks a ton!!!

Any follow up on this? I'm experiencing the same issue. NVME 1: Mac OS VM NVME 2: blank SSD 1: Mirror 1 ZFS, Promox boot + VM's SSD 2: Mirror 2 ZFS, Promox boot + VM's Basically when I remove NVME 2 it boots fine again. When I mean it doesn't boot, it goes straight to initramfs, with failed...