Search results

I'm trying to do a full restore from our PBS. Unfortunately only after a few seconds I get errors: Task viewer: VM 104 - Restore Warning: volblocksize (4096) is less than the default minimum block size (8192). To reduce wasted space a volblocksize of 16384 is recommended. new volume ID is...

Restore Log: Warning: volblocksize (4096) is less than the default minimum block size (8192). To reduce wasted space a volblocksize of 16384 is recommended. new volume ID is 'local-zfs-vms:vm-104-disk-0' Warning: volblocksize (4096) is less than the default minimum block size (8192). To reduce...

I did a windows 2016 server vm reboot this morning and since then the vm stucks in the Proxmox "Start boot option". I restarted the PVE host and also tried to go to the repair console, but nothing worked. Any ideas, how I could fix the boot procedure without having to restore the whole machine...

- after kernel update pve doesn't come up - whe I login to the console and try zpool status I get: /dev/zfs and /proc/self/mounts are required - when I try modprobe zfs I get "module zfs not found in directory /lib/modules/5.15.60-2-pve" how can I fix this error?

During bootup it shows "failed to insert module autofs4" and following that then a couple of other error messages. All that leads to a non working system. When I boot the older 5.4 kernel the system boots normally, but my vm won't start, showing only the PROXMOX logo in the console. I need...

How can I backup the configuration files of my nodes on the PBS server? I could not find any information about this. Thanks and merry christmas!

I have two PVE systems which are not connected, both have a valid subscription and the same apt sources settings, but I get different results on running package update while both claiming that no updates are available: proxmox-ve: 5.1-40 (running kernel: 4.13.13-4-pve) pve-manager: 5.1-46...

Hello, at the headquarter of our facility is currently running a PVE server (v5.1), on which several virtual servers are operated. We will soon get another location and the network there will be connected to the main site via VPN. The line capacity for the VPN is extremely limited (about 1 ~ 2...

I'm trying to setup another PVE on an old Intel S5500BC with an SSD and a couple of SATA drives connected to the onboard SATA (AHCI mode in BIOS) The Mainboard BIOS is the last available from 2014. I'm trying to setup proxmox on the SSD and the data will be located on an zfs pool on the 4 6TB...

Windows 2008 64bit server balloon driver version: 08/11/2016,60.73.104.12600 from virtio-win 0.1.126 after installing it with blnsvr -i I get: Service not started. Current State: 1 Exit Code: 1008 Service Specific Exit Code: 0 Check Point: 0 Wait Hint: 0 Starting it inside services...

Hi, i did a new installation of proxmox 5 onto new hardware and I moved an existing zfs pool into the new machine. I successfully imported the pool via zpool import. Then I added the pool to the storage of my ProxMox cluster. Now I can see the existing vm-101-disk-1 as raw disk image in the...

Hello, I have a running Proxmox V5 on a HP ProLiant DL380p Gen8 with 96GB RAM and 2 Xeon CPU E5-2670 0 @ 2.60GHz. Storage is 8 x 3TB 7.2k SAS HDDs on a SmartArray P420i controller (in HBA mode for zfs). The Proxmox system was installed on an SD card, the VM data is stored in a ZFS Raid (see...

Hallo, ich habe ein laufendes Proxmox V5 auf einem HP ProLiant DL380p Gen8 mit 96GB RAM und 2 Xeon CPU E5-2670 0 @ 2.60GHz. Storage sind 8 x 3TB 7,2k SAS HDDs an einem Smart Array P420i Controller (im HBA mode für zfs). Das Proxmox System wurde testweise auf einer SD Karte installiert, die...