Search results

A real quick question guys. I have a few containers exposed and I want to be able to protect them as best as I can. At the gateway is NPM and then LXC and vm's. So is hardening the Proxmox firewall sufficient or is it recommended to have something between the NPM and the containers?

Quick question because I've hit a brick wall. Long story short I've loaded Opnsense as a vm running my router in bridge mode. I have several vm's and containers and one of them is Centos Web Panel. Although I've opened up the ports for this and set up port forwarding, ports that are requested to...

This is a pbs 3 install with an LSI SAS9211 with 6x 2tb sas hard drives hosted in a Dell Poweredge R710. PBS is installed on a USB pen and booted from that through BIOS (rather than UEFI) After installation PBS can see all 7 drives. That is to say the 6 sas drives and the USB boot drive. However...

This is a pbs 3 install with an LSI SAS9211 with 6x 2tb sas hard drives hosted in a Dell Poweredge R710. PBS is installed on a USB pen and booted from that through BIOS (rather than UEFI) After installation PBS can see all 7 drives. That is to say the 6 sas drives and the USB boot drive. However...

OK, I've gone through the forum and Google over the past few days and can't resolve this issue I have. I have a Dell R710 and removed the Perc h7xx and replaced it with a Perc H200. I then flashed the card so that it was in IT mode with bios so that I could boot to a drive if I wanted to. When...

Hi guys I hope this is a quick answer for someone. I have installed Pfsense 2.6.0 on Proxmox 7.3.3. The install went well and I installed a WAN (static public ip) and a LAN with a static ip and a DHCP pool. Pinged and all went well and as far as I can see both LAN and WAN are setup fine. This...

Hey guys I wonder if anyone has had this issue before. I backed up an instance of Nextcloud (CT) and restored it through PBS but the difference in data size is astonishing. The restored Nextcloud reports that it is using 32gb, which I believe is a fair account for the amount of data that is...

I just wanted to ask the community if I have set up PFSense correctly as I've only ever tried to do this once before and failed. My main concern is that the guests are using PFSense to access the internet. OK here's what I did. I already had Proxmox VE installed and running and has about 8 VM's...

OK long story short.. Changed hardware on the PVE and the guests no longer have access to the network properly. Maybe a dns issue but pings are all good. So today I put a new bunch of hdds into the server and installed a fresh copy of PVE (preserving the old array for emergency use if all else...

Here's my story. I installed and ran Proxmox 7 on a Dell Poweredge R710. Things were good and I hade about 6 containers and a couple of vm's. I realised how useful Proxmox was and my projects grew to the point that I had to upgrade the hardware. I ended up buying a better conditioned R710 with...

OK I'm going to apologise for this post as I have spent days looking for the solution and have read that much, I'm forgetting what I'm doing. I have only recently installed Proxmox to a bare metal Dell R710. The installation was painless and Proxmox looks like a superior setup. I've created a...