Search results

Dear All, In my infra, I created a VM for pfsense, and I have installed OpenVPN I have upgraded proxmox version from 7.1-8 to 7.4-3 last weekend, since then Im using some issues with my OpenVPN Once I have connected OpenVPN, I have no issues in accessing locally however I cant access to...

Dear Team, this is from the firewall log ngix error 2022/10/03 07:42:41 [error] 56310#100528: *6746 open() "/usr/local/www/TH6/index.xhtml" failed (2: No such file or directory), client: 192.168.1.10, server: , request: "GET /TH6/index.xhtml HTTP/2.0", host: "erp.dx.com", referrer...

Dear Team Im unable to access my website in my vm (private network) lets say public IP : 128.199.162.34 private IP : 192.168.70.10 NAT rules : 128.199.162.34 to direct to another VM ( private network) 192.168.40.10 Im able to access 128.199.162.34/test from public machine however Im not able...

Hi All, I would like to know which config files need to backup and restore in a new node? Beside backup all the VM and the images any advice? As this is a new node which the disk size is bigger, is there anything I need to take note of? Thank you

Dear LnxBil, As I'm new to proxmox , getting more confused in reading Longer version Short: increase your partition size sdb1 ( how about this?) resize your fs ( are you referring to resize2fs /dev/sdb1 To confirm, I have added 2 extra hard drives to existing raid 6 , this new changes has...

Dear All, After I reboot the system, i can see the increased size of ( 2 * 8TB) from 32TB to 48TB how do i extend the increase storage in my existing partition (ext4) which is mounted as /mnt/pve/data5 From the main pve under disk management view : /dev/sdb -> 48TB - /dev/sdb1...

Dear All, Im using Dell Server PowerEdge, before adding in the new hard drives , the setup is 2 virtual disk disk ( 1 is meant for OS installation while the other is meant for data) I have attached the screenshot which show the disk in sdb sdb 8:16 0 29.1T 0 disk...

Dear Dominic, Ideally I'm using few servers to setup proxmox and test H.A with Ceph . There is limited source I can search for proxmox to setup Ceph. 1) if node A is down, it will be automatically load all the VPS in Node A in Node B with minimize downtime 2) to have a backup of the VMs My...

Dear Team, Im trying to setup local private network, currently I have 2 servers , each with 1gbps NIC and link up with lan cable. I do have a public network for each server I have no issues in setting up public network and link them using server 1 I have created vmbr0 as Linux bridge, bridge...

"What you could do now is creating multiple cluster on each side and use Ceph mirror (or pve-zsync for single nodes or non-ceph setups) to mirror the storage of the VM/CTs to the other cluster in the other DCs, for redundancy." does it mean H.A still possible? to move all VMS from one node to...

Dear All, Im new to proxmox, not sure if it is possible to link up different DCs in USA in one cluster ( for example OVH, Digital Ocean, hostwinds, tzulo etc..) If yes, any guidance for me to refer to? I read before OVH vRack is able to link up all nodes from OVH in one region ( USA) not sure...

Dear aaron, Currently, Im doing the testing phase where I will begin to start with 2 nodes, eventually there will be more than 3 nodes, Can I clarify network segment to share between the nodes ? which means there must be an internal network which these nodes share? I cant use the public...

Dear All, I have bought 2 servers and my host has given me 2 ip segment 192.168.0.35/29and 192.168.0.139/29 I have installed ceph on my first node and create a monitor and below is the configuration ceph file however I have encountered an issue in creating monitor for node 2 ( with a network...

I only have 1 ip address ( which can be used as public) thus I have configure to use this ip address Is there a way to edit the network ip address for this node 2? as I see from the GUI, there is no edit function for ceph ip address

Dear Team, When I try to create Ceph Manager for my node 2, there is an error as below: command '/bin/systemctl start ceph-mgr@chicago01' failed: exit code 1 When I try to create Ceph Monitor for my node 2, there is an error as below: No active IP found for the requested ceph public network...

Hi Dunuin, "If you want a real shared storage ceph might be an good alternative to ZFS. Or you could use one of the two proxmox hosts as a NAS (NFS or SMB server) and add a CIFS or NFS storage to both of them so they can access the same (not mirrored) storage over the network." Can Ceph be...

Hi Dunuin, root@chicago01:~# zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 3.39G 212G 104K /rpool rpool/ROOT 3.38G 212G 96K /rpool/ROOT rpool/ROOT/pve-1 3.38G 212G 3.38G / rpool/data 96K 212G 96K /rpool/data I have 2 servers which has the same setup above. How do i create a shared pool...

Dear All, I'm new to proxmox, the more I read from proxmox , the more I'm confused. During the installation of proxmox-ve_6.2-1, I have selected zfs Raid1. Does it mean ZFS has been create and ready to use? I would like to create share resource pool and use it for my VM. 1)Do I need to delete...