Search results

root@qbgw:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute...

lspci -v next attached

Hi Trying to get both of these NICs to work on a Lenovo SR850 v2 on Proxmox 8.2.2, have all updates loaded. Server Bios firmware has been updated to latest 227.1.115.0 for both of these cards. Adapter: Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (PCI Slot 1) Adapter: Broadcom 57414...

OK addded the blacklist. It has connected but extreamly slow, only get 1 ping in 4. I did a reboot after blacklist.

Hi, I have same issue in a Lenovo SR850 with both a Broadcom 57414 10/25GbE SFP28 2-port and Broadcom NX-E PCIe 10Gb 2-Port Base-T. I have just flashed the firmware to the latest 227ver, but still no luck in connecting. Proxmox is latest 8.2.2 all updates applied.

Yes that worked, took a few hours though.

Thanks Guys, will try leave it overnight see what happens. If it doesn't work will try Fabian's suggestion tomorrow.

Trying to install PVE 7 on a i7 PC NVMe 2TB, fails at 3% Create LVs tried different ISO's an different USB keys. using all default settings. PVE 6.4.4 installs fine, no trouble. Any ideas much appreciated.

Hi All Yes moving back the OS to XP/2003 has worked for me also, I was at my wit's end with this one as I migrated from a damaged old server to a temp new server with Pmox 5.1. Ones crash after the other. Unfortunately I'm not a Linux head, just sbs windows. Is it possible to update the PVE...

I got sorted with the help of a friend who SSH into it. It appears that I installed a version of debian over the proxmox. He was able to reinstall Proxmox while keeping all settings and VM's. Back up and running in 20min.

won't install for me on 2TB USB Hdd, says PVE already exists?

looks like I have no commands, going to try install another Proxmox on a usb drive see if I can get in that way.

When I try run this from the console I get "command not found"

Have a new install of Proxmox 5.1 on a Dell R710, about 2 weeks old. It wont load VMs and there is no GUI. I can SSH into it OK. and it is loading as far as the Proxmox login prompt. All was well until I tried to setup the backup, kept getting errors trying to start NFS, it would not load. Check...

Yes I have been using Synology for lat 2 years now with great success. I have them on about 20 sites. on a DS116 I can backup 1.1TB in just under 5 hours. Only Synology that don't work with proxmox is the DS1115e, because it dose not have NFS. Some useful info here on how to set it up...

Shortly after the last post I moved away from Proxmox to HyperV and have had no problems since. Unfortunate as all my other sites (75) run Proxmox without any trouble. But this was my biggest site, and that IBM server cost over €75k

As a last resort I had to dump proxmox on this server and install HyperV, this was at the request of IBM tech support. So far it seems to be stable now and I have moved one of my 4 Live VM servers over to it. IBM d0 not support Proxmox, but I did not have the IBM software support package, only...

Latest is the server is still not running reliably, IBM have replaced a Mid section board in the server and now they are coming to replace fans in one of the books, as the DSA report shows overheating. It looks like it was a hardware issue all along.

I purchased the memory with the server from IBM distributor. We have just had our longest up time of 12 days before the Win7 VM froze, this time one of the Server 2008 VM also froze same time, other Server 2008R2 VM was fine. Going to remove one of the books (and memory that was supplied) just...

Day 6 running OK until today, one windows 7 locked up at lunch time, had to reboot VM, Proxmox and other VM's OK.