Search results for query: hba truenas passthrough

I bought a ZimaCube Pro from IceWhale as it seemed a pretty good deal for 6 SATA drives and 4 NVME drives + 1 NVME boot drive and 10Gbe. I am trying to move from an old Dell R720 that is just too loud, too power hungry, and can't transcode without dedicated gpu, which increases loudness and...

Dominik, Thank you for your response. I will file a report. Ultimately there is a fairly common use-case to run Proxmox with TrueNAS as a VM with Passthrough drives. TrueNAS offers advanced tuning of ZFS parameters and functions with a solid user interface and reporting. In the past 8 or more...

Hello, I have installed ProxMox on a 24 NVME U.2 system and have configured TrueNAS as a VM with passthrough for the NVME drives. The challenge is that I have 21 drives and ProxMox supports only 16 PCI Devices attached to a VM in passthrough mode. I need to see all 21 drives. Right now I am...

Build: Motherboard: Asus Rog Zenith Extreme Alpha X399 CPU: Ryzen Threadripper 2970wx (24 Core, 4.2GHz) GPU: 2080 (this is the one I'm attempting to passthrough to the VM) Second GPU: Radeon Pro WX2100 RAM: 128GB Dominator Platinum DDR4 3200Mhz (8 sticks) HBA: LSI SAS 9300-16i Hard Drives...

So is adding the following to /etc/modules - also in the documentation - wrong/unnecessary too? vfio vfio_iommu_type1 vfio_pci vfio_virqfd #not needed if on kernel 6.2 or newer I will say that I did play with some BIOS options before the latest proxmox rebuild in the hope it would enable ACS...

I'm experiencing a significant issue with my Proxmox setup after adding a PERC H730 Mini RAID controller which is in HBA mode to my TrueNAS VM via adding PCI device. Here is a brief overview of my current infrastructure and the problem I'm facing: Current Setup: Server Hardware: Dell PowerEdge...

I installed Proxmox 8 on a new AMD Ryzen 5 5500GT based machine with ASRock B550M Pro SE mb using UEFI boot with two 500GB drives in ZFS RAID 1. Things generally work until I try to get PCI Passthrough working by adding "quiet iommu=pt" to /etc/kernel/cmdline, per this and other tutorials...

Ich hätte mir gerne auf Basis des Board einen stromsparenden und günstigen Homeserver aufgebaut. Um auf einen separaten HBA zu verzichten, hätte ich gerne die 6 SATA Ports per Passthrough an eine TrueNAS-VM durchgereicht. Die vier SSDs für PVE Boot und VM-Storage hätte ich über eine PCIe x16...

Hallo, ich habe vor Jahren schon mit Proxmox geliebäugelt und dann einiges getestet. Leider bakam ich damals einen HBA (IBM Lenovo M1215) für einen TrueNAS VM nicht ohne Fehlermeldungen durchgereicht. Ich habe viel probiert, es leider am Ende nicht geschafft. Mit ESXi lief es damals direkt...

Your virtual TrueNAS depends on that hardware: if it breaks, your TrueNAS will be down. You may be able to do full backups of the VM, but you won't be able to restore then unless using the same/similar hardware. If you use other NAS solutions that do not depend on specific hardware passthrough...

I am already usinf truenas bare metal with n100 and 32g and dedicated hba, 4x14tb raidz2. I am upgrading to 7840hs 64g and proxmox. 32g and controler will be used for truenas I think it will run like a charm.

TrueNAS in a VM works fine. But you probably want a dedicated HBA card and disks for TrueNAS for PCI passthrough so TrueNAS is able to directly access the real physical drives. TrueNAS uses ZFS and ZFS is quite demanding (lots of RAM, ECC RAM, Enterprise SSDs with PLP, CMR HDDs, lots of CPU...

I had a truenas instance running with pcie passthrough a few weeks ago, but I removed the hba since then. I disabled the auto-start for all my VM's, shut them off, and rebooted the machine. The led's next to the network port aren't on.

The HBA is configured with PCIe passthrough to my Truenas VM root@truenas[~]# lsblk -o name,fstype,size,label,model

Hi everyone! I´m trying to passthrough a Broadcom LSI 9500-8i HBA and a Solarflare 10Gbit NIC to my TrueNAS Core VM. Both cards are in the PCIe 5 slots, but I have tried different slots as well with no success. I disabled the kernel drivers in /etc/modprobe.d/pve-blacklist.conf : softdep...

System specs: pveversion: pve-manager/8.2.4/faa83925c9641325 (running kernel: 6.8.8-3-pve) CPU: Intel Xeon E5-2683 v4 Mobo: Asus X99-A/USB 3.1 PCIe Peripherals: LSI SAS2308 HBA, MSI GTX 980 Ti GPU Issue: I have a VM running TrueNAS on this Proxmox install with an HBA passed through. It was...

Hi, sorry für die späte Antwort - die Woche war eine Katastrophe... Ich glaube nicht, dass mein NAS das kann, bzw. ich weiß nicht, wie man dies bewerkstelligen kann. Richtig - ich habe einen Disc passthrough mit qm set 100 -scsi1 /dec/disk/b-id/..... Wie sagt man PVE, dass es diese Discs nicht...

Any news here? I just upgraded my HW to the same MoBo. I´m trying to passthrough a Broadcom 9500-8i HBA to a TrueNAS Core VM. But I see the same console output as you describe...

Ich hab da ein echtes Passthrough. Also PCI Passthrough vom ganzen HBA. Dann weiß a PVE auch nichts von den Datendisks und versucht sie auch garnicht erst zu sichern. ;) Du hast dann wohl nur "Disk Passthrough" was nicht die echten Disks durchreicht (dein TrueNAS arbeitet da genaugenommen mit...

Hi, Recently I setup a new proxmox server. However, the server freezes after some hours of runtime. Fortunately, i can access the server via IPMI, but the console is not responding. SSH connection is also not possible. Are there any log files, which could help me narrow down this problem? Can...