Search results

aptitude update && aptitude full-upgrade? fails when ssh into proxmox ve server and run from command line. I try ping yahoo.com from command line get "unknown host". I can ping gateway address and ping other servers on local network. Proxmox ve server is using a Bonded eth0 and...

I have 2 gigabit network cards bonded on both the node server and shared storage using balance-alb. My switch is a problem because it is 100mb not a gigabit switch. I have a gigabit on order to get rid of that bottleneck. I was testing a large vm to see how it would behave. Want to have a vm...

Its a big vm. 700 gig or so. put a backup on shared storage and restoring on to local storage. Its been going for about 1 day now.

Qmrestore is painfully slow on a large vm. Any suggestions for speeding it up? I have seen some posts on PVE1.0 forum but none on PVE2.x. Thanks.

also, use mode=6 (balance-alb). if you don't have a managed switch.

I think I got mine to work yesterday using: Set bond0 ; ports/slaves = eth0 eth1 , IP xx.xx.xx.100 Subnet mask xx.xx.xx.0 gateway xx.xx.xx.1 Set vmbr0; ports/slaves = bond0 , IP <same as above(bond0)> subnet <same as above (bond0)> , leave gateway address null. I don't know why vmbr0 needs...

How do you bond in PVE 2.0 (round robin would be fine). Do you use the GUI to do this or configure via files? Whats the procedure for no VLAN nothing complicated, just 2 nics eth0 and eth1 on PVE 2.x install? Thanks!

I have a VM that I'm configuring as a email server (ubuntu 12.10) 1TB . I initially configured this as raw. But then I realized when baking up it takes a long, long time to shared storage. So this is an issue for me. I know I could use a smaller disk, then re-size it, but not sure I want to go...

On this problem. When I unmounted the ISO I created the VM with, migration worked... Dumb on my part, cause that makes sense I guess.

I have some vms on shared storage, IP address for storage device needs to change. What files / commands do I need to run to be able to access the VMs with new IP address? Thanks!

I have 2 nodes. using a readynas 3100 for shared storage. I get this error. Looking for some help on how to debug & fix it. May 29 10:12:49 starting migration of VM 400 to node 'cloud1' (10.15.223.136) May 29 10:12:49 copying disk images May 29 10:12:52 ERROR: Failed to sync data - mount error...

I changed node IP in GUI and /etc/hosts and get migration error. Not sure if I have to recreate the cluster or was hoping there is an easier fix? Here is the error: May 25 16:27:38 # /usr/bin/ssh -c blowfish -o 'BatchMode=yes' root@x.x.223.136 /bin/true May 25 16:27:38 Host key verification...

Thanks Tom. I'm trying to get 2 nodes up, a quorum disk, and fencing to work. Then add another Node before using the HA feature on a VM. Do you think there is any issue with that? For fencing, I just want to make sure I can use the baseboard management console in the dell servers for fencing...

I can boot and reboot the devices using supermicro (IPMIview). My xml file looks like this: <?xml version="1.0"?> <cluster name="ptgcld1" config_version="4"> <cman keyfile="/var/lib/pve-cluster/corosync.authkey"> </cman> <fencedevices> <fencedevice agent="fence_ipmilan"...

Curious if yo made any progress? I have the same issue. I'm kind of a nub to proxmox and I haven't found any good example of how to do this with mkqdisk, etc. ? Anything you could share would be great.

hotwired007 , Curious if you got this to work? I finally got my setup inplace and am about to try it out. Appreciate any experience with it you could share? Thanks in advance.

I set up iscsi storage and LVM using "LVM Groups with Network Backing" as described here: http://pve.proxmox.com/wiki/Storage_Model Then I installed a new vm (ubuntu 12.04) just to test a migration on the LVM , named it LVM1. VM runs fine on cluster 1. If I stop it and try to migrate it to...

I set up a iscsi target name "qdisk" of 1 Gig size on my storage server. Do I need to add the iscsi target in the proxmox gui i.e. "LVM Groups with Network Backing"? I'm struggling with the device parameter in the mkqdisk command. Whats the best way to do this? is ISCSI the right way or...

I am curious why this is so : "storage type lvm does not support format vmdk" ? I am using iscsi on shared storage device. I know it is a limitation and vms need to be stored as raw, but why is this?

Question I have. I know in a 2 node config, if one node goes down and you start a vm you get a quorum error and you cant start the VM/s. I'm pretty sure this is because you need 3 nodes for (voting I think?) redundancy. The issue I have is I have 2 servers and a shared storage server. 1. Is...