Search results

I had the same issue with a SuperMicro A1SRM-2758F, you need to look at specifically which MAC addresses and which ports are which, because its a little confusing at first. LAN1(eth0) and LAN2(eth1) are next to each other on the bottom on my board, then LAN3(eth2) and LAN 4(eth3) are the top 2...

Re: New Mini-itx Proxmox Build Jup, or this one, which is mATX, with 2 PCIe ports for expansion: http://www.supermicro.nl/products/motherboard/Atom/X10/A1SRM-2758F.cfm I have this one, and its running great. the four GBE ports are bonded to 2x 2 ports for vmbr0 and vmbr1, getting 115 to...

Re: Dedicating a NIC to a VM (or any alternative way of achieving an equivalent resul You can create a bridge on the ProxMox VE host, like, vmbr1, assign eth1 as a bridged port, but, do not assign an IP-address to it. Next, in your VM assign the interface to vmbr1 and within the VM configre...

No, the partitioned RAID-5 device is handed over as a 'raw' device to the KVM (SCSI disk). Within the KVM it is handled as "/dev/sda" The device is then formatted within the KVM as a large single disk, (16.5 TB) and formatted XFS. The RAID-5 disk as seen on the ProxMox host : sd 16:0:0:0...

I'm running a fileserver in a KVM , using a RAID-5 device which is configured as a SCSI device to the KVM. scsi0: /dev/sdc1 (partitioned RAID5 device) It works fantastically, I get 105 to 110 MBytes/s with it, in both up and down link to the KVM based fileserver (CentOS 6.5). Hardware has...

Which looks to me like a faulty DVD-drive in the ProxMox server.... Cant' you create an ISO with your workstation and copy it to the server ? Or place it on a thumb-drive and place it on the server that way ?

That is some strange thing. On my simple Core i5 based ProxMox VE server, transfer rates are at near wirespeed, 115 MB/s to and from a Windows 7 Based workstation. I remember going from an old Linux Samba2 based config to this new Samba 3 based config. the tuning parameter that really helped...

I think the second NIC is disabled in the BIOS ..

Re: What does it mean by Subscription?Do I need to purchase license to activate resou Actually, the more than excellent support given by this forum is also free... If you want Professional support when using in a high stakes professional capacity, then its wise to purchase support.. For the...

I had allmost the same issue before, I came down to the CDROM image not being available on the second node local storage iso directory. Either synching up the iso storage directory or removing the cdrom image from the VM storage (not needed anymore since the OS is already installed anyway) fixed...

Re: Using clvmd in KVMs disrupts ProxMox frontend Storage view Ha.. nice ! :cool: Thanks again !

Re: Using clvmd in KVMs disrupts ProxMox frontend Storage view Udo, I now created a partition in my KVM (v)hdd, as /dev/vdb1 , but, unfortunately, it didn't help. Then I thought, wait a second, I didn't remove the vdisks so the LVM meta data is still on there.... I removed and recreated the...

Re: Using clvmd in KVMs disrupts ProxMox frontend Storage view Thanks, I'll give it a try tomorrow and report back ...

Re: Using clvmd in KVMs disrupts ProxMox frontend Storage view Udo, Thanks for your reply. Indeed I'm using a cLVM on the raw (with DRBD replication) (v)hdd. So, basically, if I create a partition, /dev/vhb1 and use that as my DRBD0 device inside my VM's, create the cLVM ontop of the DRBD0...

First off, lets talk about what I'm doing. Running 2 DELL M610 blades as a ProxMox VE 2.1 cluster with iSCSI shared storage + a quorum disk for HA. I've created two KVM's with CentOS, and a DRBD replicated storage with GFS2 + RedHat/CentOS cluster inside those KVM's. This is to replicate in...

I'm using a Hardware RAID controller (HighPoint RR 3520 (Intel IOP-based)) to expose a 8TB (4x 2TB RAID-0) device on the host, to a virtual SCSI disk on my fileserver VM, (Linux). No problems here...

To get a feel for ProxMox I installed it on my homeserver and its running fabulously. Its a quadCore Q9550 with 8GB ram, a HighPoint RR3520 (Intel IOP-based) 8port SATA-RAID controller, an Intel 2 port Gbit/s LAN adapter . Its currently running 5 Linux KVM's ( 1x webserver (multi-site, both...

I know its not very important, but, ext3/4 even with 'delayed allocation' takes many minutes just to create the filesystem, while XFS, independent of size takes seconds to create. Me, I've been using XFS on Linux since 2.4 kernel, it has never let me down. And with a little tuning, has always...

You can create a new virtual bridge, which isn't coupled to the ethernet network. Create new bridge (vmbr1) and instead of coupling a member port to it, just create the bridge device. Next, create your VM's and couple them to the new bridge (vmbr1). This network will then only exist within the...

pve-manager: 1.8-18 (pve-manager/1.8/6070) running kernel: 2.6.35-1-pve proxmox-ve-2.6.35: 1.8-11 pve-kernel-2.6.32-4-pve: 2.6.32-33 pve-kernel-2.6.35-1-pve: 2.6.35-11 qemu-server: 1.1-30 pve-firmware: 1.0-11 libpve-storage-perl: 1.0-17 vncterm: 0.9-2 vzctl: 3.0.28-1pve1 vzdump: 1.2-14 vzprocps...