Search results

Hi ! I plan to install a dedicated PBS for all my PVE clusters. Which is composed by : 1 Intel Xeon Silver 4216 (2,1GHz, 16C/32T) 64 Go RAM 2 sata disks for OS 10 x 4To sata disk for ZFS 2x 25Gb NICs I also added 2x SAS SSD drives (400 Go) writes intensive. What is the best way to configure...

Thanks... I ran the command line instead Also, did you ever seen some bad writes performances with ceph just after building the first pool ? For example, with 18 SSD ODS => 400Mbytes/s writes and 2000Mbytes/s read. I was expecting 900Mbytes/s for writes With same hardware on proxmox 5.4 =>...

Here is a screenshot

Same behaviour on a fresh install of pve on vmware workstation

Hi, Yes, works as expected

Hi, After installing 3 nodes on a fresh cluster (6.2-11) I'm not able to install Ceph from GUI. Error is : nothing interesting on syslog. Thanks in advance ! Antoine

I was wrong common/options: Disable bluefs_buffered_io by default again (pr#34297, Mark Nelson) Good !

thanks... seems not :/

Hi, Is 14.2.11 fix this issue ?

From my understanding writes should go on a queue in RAM until FS becomes writable.

Hi, Yes but only the time needed for taking the snapshot. In fact no more than few seconds

Hi, thanks Understood.

Hi, I usually use 2 x 2x10Gb network cards like this : vmbr0 : LACP bond0 with 2x10Gb ports ceph (pub/priv) : LACP bond1 with 2x10Gb ports So we may say that there are 2 dedicated interfaces, one for vms, the other for ceph. But it requires 4 ports on my switch. I'm wondering if it could be...

It works ! Thanks a lot !

Hi, I'm testing the great Proxmox Mail Gateway. :) For outgoing mails we want to push them to mailjet. So at the end of main.cf I added : relayhost = in-v3.mailjet.com smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd after installing libsasl2-modules and...

Hi, I always run ceph-volume lvm zap /dev/sdX --destroy before creating a new osd

i rebooted several times and nothing left in /etc/ceph/

thanks ! I recreated the osd.9 seems to be ok I still have these messages on the syslog file : Running command: /usr/sbin/ceph-volume lvm trigger 9-7d980d55-34bf-456b-9f68-839585aba395 Running command: /usr/sbin/ceph-volume lvm trigger 9-9501cd08-984b-4ee9-aafe-c58ea0402dc4 theses volumes...