Search results

Hi @Steve087 The AMD reset bug fix which I finalised on detailed on the 1st link. (remember a fix is required on both the host and within the guest VM) It works perfectly on the 780m, however I've not check for HDMI output as I only RDP into the guest VM. Derek

Hi Kain-B, I'm not sure if this will help, but I had to use a number of guides to the 780m iGPU passthrough working correctly on my Windows guest VM. 1st problem is that the IGPU requires the correct rom files attached to the iGPU for passthrough to work (plus you my need to passthrough the...

Hi Steve087, I'm not sure if this is of any help, but I used the following guide to get the vendor reset functional on my 780m iGPU. https://github.com/isc30/ryzen-gpu-passthrough-proxmox/issues/131 Also, this guide provides a detailed explanation of the AMD reset Bug, which must be resolved...

Hi mrmrv, I have managed to get the passthrough working in Windows 11 by following a combination of 3 different guides: Note: I have not tested with a physical monitor connected as I only access via RDP. And I do have a dummy monitor dongle plugged in but I don't know if it's required or not...

Just in case people reach this threat trying to overcome the Windows error 43 with the AMD iGPU, I have just completed the setup and got the 780m working correctly, including overcoming the AMD reset bug, so now I can start / stop the VM correctly from the host and from within the Guest VM. I...

I've reached about the same point as you have there on the Aoostar WTR Max (8845hs Pro) with 780M). I have managed to get the VM guest rebooting now without having to reboot the host. but I've tried every guide which I can find without solving the error 43.

Perfect, I found the enc file, added to the 2nd pbs, and now I can restore the synced backup OK. I've also stored the file in a safe location so both of my issues are solved. Thank you Neobin, that saved me a lot of work here.

Hi all, I'm posting this here on the off chance that there is a solution to my problem. I have a fully operational PBS with encrypted backup for around the last 2-3 years. I recently setup a second PBS for use as an off-site synced backup server, all is working except I can restore from the...

Final update on this Realtek 5Gbe NIC issue. The Realtek RTL8126 based M.2 A+E key (PCIe NIC) works correctly and can be installed in place of the WiFi card. I have one now fitted in my Win 10 PC, and if I need WiFi I'll fit a USB model. This is the NIC I used...

Perhaps this is the new model which Wavelink are advising about? They are now providing external power to the 5G NIC...

Hi Sunseeker2k5, Thanks for all the work you've put into investigating this issue, you are right, the USB standards committee really dropped the ball when it comes to the USB3.x specs. There are some USB 3.1 which do communicate @ 10000M, but it seems that most only communicate @ 5000M. I'm...

@rebelliouswhiz, No, it's definitely an RTL8157, I have multiple 6th Gen mini PC's here in my Proxmox cluster, all of those connect at 5000M (USB.3.0) and then I get the 3.3 Gbits/sec TX/RX and the connection is unstable. On the N150 where it connects at 10000M, it's rock solid. Other points...

Well gentlemen, I think I have got an USB RTL8157 communicating @ 5Gbe as expected here, The client rig is a Intel N150 Proxmox node - Linux pve-4 6.8.12-10-pve - All NVMe NAS Realtek Driver - r8152 - ver. 2.19.2-1 Driver installation with the Debian package installer #dpkg -i...

Just to add my input on this subject. I have the WisPi RTL8157 & a couple of no brand units. Tested on mostly 6th gen Proxmox mini PC's, but I also have an Intel N150 all SSD which is the one I'm really concerned about. I've found the Tx/Rx rate at around 3.6Gbps on the 6th Gen units, but...

@sunseeker2k5, Thanks for putting those instructions together, I'll give it a try tomorrow and let you know how I get on. If it's any help to you, I've found the same Realtek 5Gbe chipset which plugs into a PCIe M.2 A+E key slot so can replace a Wifi Card if that's available to you. Only it's...

Hi sunseeker2k5, Can you write up a step by step guide to get this working, that would be much appreciated. I have already had to re-install my Proxmox after following different instructions which didn't work correctly and this is the 1st time I'm having to build the kernel in Linux. Thank you.

Brilliant !! That solved the problem, edited the vm.conf from another node and now the offending node is able to boot and join the cluster. I was not aware that the cluster vm.conf was stored in that location - so I've definitely learned something new here. Thank you so much mvs, you've saved...

HI all, I have a node which is a member of a cluster, where I've done the stupidest thing and now the nodes is unable to boot. I passthrough the full onboard SATA interface, the one where my pve boot drive is plugged into, now the node fails to boot, even with the Proxmox installation media...

This advise is great, but for a novice like me who does most from the web interface, difficult to follow.

Hi Sterzy, Thanks for the prompt advise. Does that mean i should remove the node pve-2 again, remove the old pve-2 key and then re-add pve-2? DerekG