Search results

We are planning a multi node CEPH cluster (storage pool with many SAS drives) so didn't think the HW RAID would be neccesary? (or might even be a bad idea-from what I've read) What storage options are you using in Proxmox?

I am new to Proxmox and wondering how best to configure a network on a cluster so that the VMs are acccessed via the physcal (host) node IP addresses. i.e. I don't want to take up lots of IP addresses on my network so ideally there will be a bunch of VMs on a private network and they can only be...

Just to finish this thread off. Above I was testing Proxmox Clustering using nested virtualization within Hyper-V. I installed Proxmox directly on a Dell R620 server node and followed above steps again (no issues) i.e.: 1. I accessed the web interface and set the proxy via "Datacenter" >...

No but first I had a look at the H730 perc mini raid controller settings and changed the controller from RAID to HBA mode, rebooted the server and my SATA and 2 SAS disks were detected by the Proxmox installer! I then successfully installed Proxmox onto the SATA drive. Thanks.

I have tested out Proxmox (most recent release) using nested virtualization and now want to test it on a physical node: a Dell R630 server which has a SATA and 2 SAS drives installed. I create a bootable iso on a USB drive (DD mode) and booted to this and then selected the option to install but...

See errors in Edge and Chrome posted above. Thanks.

In Chrome: Your connection is not private Attackers might be trying to steal your information from 10.140.79.120 (for example, passwords, messages or credit cards). Learn more NET::ERR_CERT_AUTHORITY_INVALID Help improve Chrome security by sending URLs of some pages that you visit, limited...

In edge: This site is not secure This might mean that someone’s trying to fool you or steal any info you send to the server. You should close this site immediately...

Update: It think it was an issue with the other nodes IP addresses i selected on my network. I managed to install Ceph on other two nodes using 3 steps above.

Thanks for the info. I reinstalled my 3 proxmox nodes (X.X.X.120,X.X.X.121,X.X.X,122 / with FQDNs etc.) and before creating any cluster tried to set the proxy and install ceph on each node. On the first node (X.X.X.120) this worked without issue: 1. I accessed the web interface and set the...

I connect to the internet through a proxy which (I don't have control of) and I've tried setting through the Proxmox web interface: "Datacenter" > "Options" the correct proxy as I have used elsewhere i.e. with format http://<username>:<password>@<proxy_ip_address>:3128/ but when I try to...

My management node was configured with FQDN/static IP and all other network settings correct and have tried to access the web interface but cannot access from two other (tried so far) Windows 10 systems on same network (using either Firefox / Chrome / Internet Explorer and Edge). Using 'curl'...