Search results

I tried CloneZilla, but still no go but I think is related to UEFI bios - I tried this : ********** qemu-img check -r all '/saspool/shares/temp/BuildMachine.vhdx' qemu-img convert -f vhdx /saspool/shares/temp/BuildMachine.vhdx /saspool/shares/temp/BuildMachine.raw dd...

I am still struggling and It looks like my main issue is that my VM are generation 2 windows - but still not sure. So I am still trying, I will try CloneZilla today when I have some thing that works and will update here. Thanks again

Hi Any suggestions on how I can migrate windows and linux hyper-v images to my proxmox running ZFS - when I create a VM and specify a disk it will create a zvol (I think) can I use qemu-img convert to raw or something like that and if so how? Thanks a mill

I see the 3 hosts are interconnected with bonding in broadcast mode, how is that connected on the back? Thanks!

Hi I am planning to have 3 hosts with a ssd and sata pool, does this still apply : http://www.sebastien-han.fr/blog/2014/08/25/ceph-mix-sata-and-ssd-within-the-same-box/ Or is there another approach? Thanks

I tried to reboot 4-5 times and no issue now - (how to I add the solved prefix?)

Thanks :) - it looks just right, I will try it and reply back if it does not work :)

Hi Sometimes the rpool import fails when booting on my Dell R730XD with 2 x Intel SSD 3510 200GB on the rear side slot 25+26 If I manually import it with "/sbin/zpool import -B rpool" is seems to work I upgraded Avarto/LSI HBA to latets firmware Thanks Felix

thanks a million it works :) - great

Ok I did try layer2+3 but did not get it to work from proxmox. So I have to create an IP address on the bond configuration or to get the bond active? Does the rest look right? Thanks Felix

Hi I am trying to get proxmox to work with an LACP trunk connected to a Netgear stacked switch. On the Netgear the LAG port is tagged with all 4 VLANs It works with access from proxmox but not from containers/kvm, here is my config auto lo iface lo inet loopback iface eth0 inet manual...

Yes I get that, but what would be the optimal config I could do with the hardware I have?

Hi I am thinking about converting our current setup to a Proxmox cluster with CEPH. Current setup : 3 x Dell R720and 2 x Dell compellent SANs (see diskcount below) Disk count: 06 x SSD 400GB (DELL LB406S) (Write Intensive) 06 x SSD 1600GB (DELL LB1606R) (Mixed use) 24 x NL 1200GB (DELL...

3-4TB SSD, 6TB spinning disks

I plan to use 256GB of memory and having 5-10VMs various OS - we can agree HBA is the way to go running ZFS correct?

Thanks - I plan to use ZFS, so no need for hardware raid controller

Hi Is this PERC HBA330 12GB Controller Minicard supported in Proxmox? Would like to be sure before I spend lots of money on the server R730 :) Thanks Felix

Hi Does Proxmox support 2 nodes in a cluster to share the same disks on a JBOD - running with ZFS? - so in a host failover scenario filesystem would be up Thanks Felix

Hi Yes of course clever :) - If you have any information on how to do it, I would appreciate it Thanks again

Thanks :) Is it possible to join multiple domains - for different shares and tenants? - or only one is possible