Search results

Having same issue with glusterfs 3.5.2. Proxmox gives timeout, but VM actually starts. TASK ERROR: start failed: command '/usr/bin/kvm -id 127 -chardev 'socket,id=qmp,path=/var/run/qemu-server/127.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -vnc...

as far as I know in system with multiple gateways there might be problems with routing, if there is no source routing defined.

symmcom For testing I use wget and iperf. kobuki Thanks! I'll try to find out, where is the missconfiguration in my setup.

I'll try. We run own ASNUM with 2+ gbps IPT connection and 10gbps backbone, so 1 gbps is not a problem :) I expect to get 1gps at least between internal networks. In the same subnet there is gigabit doable. No limits for that subnet where this VM is (checked twice). From Internet I expect to...

do you use multiple gateways on single os?

traceroute -s <eth0 IP> some host look what will happen. p.s. it would be easier with schemes. Always use traceroute and tcpdump as debuging tool. Also, as ip forwarding is allowed in iptables, why it would not try to forwawrd eth0 packets via eth1? remember the default network rule? If I...

I get 1 gbps from the VE host where this VM is running from. Same problem from VM to other internal network segments. So the 1 gbps is working within the same segment only. I wish I could know the reason why.

Re: Proxmox and GlusterFS If someone ever will find himself in the same situation: answer is: gluster volume set <volname> cluster.self-heal-daemon off on the volume, where your VM disks are. BTW, don't test VMs with files generated from /dev/zero. Some kind of bug, files remain unsynced and...

Hi, VM to other servers in same network performance is around 30-50 MB /sec VM to internet performance is strictly 10 MB /s So inside one subnet gigabit network is working, but outside is not. Using virtio drivers. Any ideas?

Re: Proxmox and GlusterFS Hey, I've almost broke my brains. Have anyone ever managed to set up glusterfs replicated storage that way, so it works with automatic failover ? I mean this situation: 1. installed replicated storage 2. mounted it in proxmox 3. create a VM on this storage 4. shut...

hehe. It's Ubuntu template. Don't use Ubuntu as VZ container. Don't know why, but they are always halfdone or smth. I had same problem far way ago, check this thread out. There are some solutions. http://forum.proxmox.com/threads/3738-OpenVZ-container-networking-trouble If you want to use...

sure it can be. zywall is a firewall and you have to create rules to allow traffic from and in DMZ zone :)

sysctl net.ipv4.ip_forward is ?

are you able to ping the default gateway?

http://forum.proxmox.com/threads/19087-Question-about-network-configuration?p=97890#post97890

sure. your interface is not up. set it up in /etc/network/interfaces like you wold do it in usual physical machine. in example: auto eth0 interface eth0 inet static address 192.168.3.12 netmask 255.255.255.0 gateway 192.168.3.1 save and run ifup eth0

I think, that he just didn't know that IP addresses are visible on screenshots and wanted to hide or be more abstracted from the numbers. Look at the SS with bridge. there is 192.168.3.0/24 configured. Or may be tehre are multiple interfaces.

If you are using containers, it is not that easy to use console to connect to them. Look for solution on Proxmox Wiki. If you want to go inside the container, just login via ssh in Proxmox VE and use these commands: vzllist -a this will show all containers running under OpenVZ vzctl enter...

I prefer to use bridged mode to simplify my setups.

Re: Proxmox and GlusterFS So two things are running out from my tests: 1. glusterfs and kvm = no go for live failover. VMs keep locking FS to readonly after one of GlusterFS nodes is down / the one from VM was booted / (workaround: errors=continue in fstab, but it is dangerous). To get them...