Search results

updates installed ... no change ... pveperf still shows FSYNCS < 20

It's an intel-server E3-1230 V2 with an 3ware 9750-4i RAID controller. lspci -nn | grep 3w 02:00.0 RAID bus controller [0104]: 3ware Inc 9750 SAS2/SATA-II RAID PCIe [13c1:1010] (rev 05) lsmod | grep 3w 3w_sas 28672 2 shouldn't this be 3w_9xxx ? antother machine uses this one...

hi folkz ... ... I've upgraded from 3.4 to 4.1 today. Upgrade-procedure went smooth and without any errors. But the performance of the three running windows-vms is very poor now. f.e.: - boot time grows from < 2min to > 10min ... - high cpu load on kvm for all machines these vms run fine...

Did u changed the IP(s) of the vmbr interface(s)? In that case: Don't forget to change them in /etc/hosts too ;) Looks like the web interface is using this entry.

by opening the console for a linux kvm guest, the german layout is not usable. f.e.: ä,ö,ü without function, z and y changed ... in datacenter the keyboard is set to german (de) and in the guest it's set to default. but a change in the guest to german (de) is not making any changes ... via...

localectl status shows System Locale: LANG=en_US.UTF-8 LANGUAGE=en_US:en VC Keymap: n/a X11 layout: de X11 Model: pc105 regards Rico

hiho @ all ... ... I've installed a Proxmox 4 on my server. Works fine ... except the noVNC-console ... Neither proxmox-shell nor kvm-guests (linux) get the right keyboard layout, configured in datacenter -> options, set to German (de) for the linux-kvm-guests, "loadkeys de" is working. but...

Not fundamentally ;) Found something more ... "Clear Type" is the killer for my behaviour ... It's needed for some apps on lan-side because types are nearly unreadably in fullscreen mode ... But it's not needed on wan-side ... ticked it off and now it's really faster when displaying...

I've tried more things to figure out the problem ... We've installed TeamViewer on all related VMs. Starting our Business Software directly on the Terminal via Teamviewer works slightly faster than via RDP. Copied the Software to our SQL-Server and launched it on that host in Teamviewer. Also...

thx for the infos ... I've tried running our Programm direktly on the sql-machine ... same prob ... results after a search comin' in "line by line" ... So I agree with fireon ... I'll test it with pci-passthrough ... Which one is preferred for that? Think, I'll gonna try a passive card ...

we've migrated our complete environment to proxmox. One of the virtual machines is a Windows 2008 R2 Terminal Server. The MS-SQL is also running in a VM on the same host. Performance is fine ... including disc and network ;) Only the video performance is not the best. f.e.: Results of a...

I've done the "default" way to setup proxmox with 2 NIC. eth0 (production) eth1 (education) proxmox and the created samba-share is only reachable from eth0 is it possible to reach the web-gui and the share from eth1 ? we need to migrate a physical machine to proxmox and i want to copy the...

sry 4 late reply ... here we go : HOST : VM : I/O prob in VM ... write : 118 MB/s read : 296 MB/s

IO-problem ... thought of that too ... hdparm on host and guest shows nearly identic rates ... host (/var/lib/vz) omv (virtio-drive) i'm sorry ... but i don't know how to check sync ... pveperf qm config

i'm currently testing proxmox 3.1 (i3 with raid10, realtek-nic for wan access, intel gb nic for lan access ...) 1st VM is OpenMediaVault ... connected to the intel nic with VirtIO transfer of a 1 GB file from a win7-host to a smb-share works with only 11 MB/s ... so i installed samba direct on...

hi folks ... ... i've added a new HD (2 TB) to the server. It's just one primary partition with 2 TB, filesystem ext3 It's mounted to /storage Then added a new storage, type "Directory" to proxmox ... Then I had a view to the status-page and getting wondered! about 90GB used ?!?!?! by what...

root@proxmox2:~# df -h /var/lib/vz Filesystem Size Used Avail Use% Mounted on /dev/mapper/raid-vms 1.5T 198M 1.4T 1% /var/lib/vz like described in start-thread ... @udo ... ich denke, wir beide könnten auch auf DE kommunizieren ;)

here's ... root@proxmox2:~# du -ks /var/lib/vz/* 4 /var/lib/vz/dump 4 /var/lib/vz/images 4 /var/lib/vz/lock 16 /var/lib/vz/lost+found 4 /var/lib/vz/private 12 /var/lib/vz/template

I've installed ProxMox 3.x to a 250GB SSD I want the storage on a software-raid 10 of 4 sata3-drives, each 1TB. So i thought, it should be the easiest way to move the mount-point to the new LV old : /dev/mapper/pve-data --> /var/lib/vz new : /dev/mapper/raid-vms --> /var/lib/vz my steps: -...