Search results

2 Things are important that this is working. First the serial port: Second, the right grub config inside your VM. Here as example an Ubuntu 24.04: cat /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT="console=ttyS0,115200 fsck.repair=preen" This part console=ttyS0,115200 After you have set...

HPE was a little different. I did have a broken controller a few times :eek: . But what was even worse than a broken controller was a bad firmware update. This then corrupted the data. I can still remember it well. It was quite a back and forth with HP. But I've only been using Open Hardware for...

Today is mix-up day. I meant the controller, of course, I changed it above. o_O:p

There are ZFS commands for this. The command zpool import <pooname> is used to import a pool. See also zpool help import

If your VM is configured correctly with the serial console, xterm.js is automatically used as the default viewer. The same applies to Spice. And what kind of guest operating system is it?

So first of all, ZFS is not a software raid. What you mean is MDADM. Basically, ZFS requires a little more performance. But it also depends on the use case. If you are interested, I would recommend trying out features in a VM and reading the documentation. It also tells you how to reduce the RAM...

I can't help you with the Flash, but what is with ZFS? It can turn the drives into a clean and stable raid. Raid level recommendation for performance: Raid10

Stabilität nein, Leistung ja. Ich muss an dieser Stelle leider vorwarnen. Nicht bei jedem Windows funktioniert dies. Je nach Vorgeschichte was so alles bereits am OS in Jahren geschehen ist. Ich vermute einmal die folgende Dokumentation zu den Themen hast du schon durch...

Wieso eigentlich RaidZ? Das hat die meisten Nachteile. Ist am langsamsten, beim Rebuild braucht es ewig, und es ist am anfälligsten beim Plattenausfall, aja und mit erweitern ist halt auch nicht so easy. Hätte bis jetzt noch NIE einen Grund gesehen das auch nur irgendwo zu verwenden. Und schon...

I assume the same behavior in “non-graphical mode”? Please check if the downloaded ISO matches the checksum. If it matches, try a different USB stick for the installation. I have also found posts with this behavior where activating the CSM in the bios helped. An e.g. Ubuntu 24.04 could boot?

Looks suspiciously like a rights issue to me... What kind of user are you logged into the WebUI?

Tested it with Windows Server 2022. I don't have this behavior there. It's not perfect, but the image is not torn. I looked at the behavior with KDE Plasma (Kubuntu 24.04 LTS) with Nomachine Workstation. It is the same there. Not perfect, but the image is not torn.. There is also the delay over...

Sehr gut für den Einstieg ist: https://wiki.ubuntuusers.de/Startseite/ Fertiger Terminalserver mit x2go: https://forum.proxmox.com/threads/lxc-template-ubuntu-business-desktop-converted-to-lxc.27998/post-581335 Bevorzugte Desktopvariante (funktioniert nicht mit x2go): https://kubuntu.org/...

Hier noch der Link zur Dokumentation https://kb.nomachine.com/AR05P00982 Have Fun!

Was stellst du dir denn da vor? Magst du uns das noch etwas genauer beschreiben? Ich nutze ähnliches mit einem vollwertigen Desktop: https://forum.proxmox.com/threads/client-zugriff-auf-proxmox-vm-windows-und-linux.153806/post-713806 als Terminalserver.

Please take a look at this very long thread. Perhaps you will find what you are looking for there. I can tell you from my own experience (and I worked with HPE for over 12 years) that the hp-ams.service rarely really worked with Linux. That's why I gave it up at some point.

Ich hab hier Virtio GPU mit 128MB eingestellt, das schafft die Auflösung auf einem Lubuntu 24.04. Als Zugriff verwende ich dort die freie Version von Nomachine, das kann auch die Auflösung automatisch anpassen. Ist leider ein wenig schwerfällig. Wenn du eine Lösung haben möchtest die sich...

With an unprivileged CT it could be hard to mount cifs. https://forum.proxmox.com/threads/tutorial-unprivileged-lxcs-mount-cifs-shares.101795/ I haven't read through the (very very long) thread, but have a look and see if you can find another solution. As workaround use "rsync" to copy all your...

Could now download and install a Rhel directly. Also works here with 36GB as it should. Kernel 5.14.0-427.40.1.el9_4.x86_64. agent: 1 bios: ovmf boot: order=scsi0 cores: 6 cpu: host efidisk0: SSD-vmdata:vm-164-disk-0,efitype=4m,size=1M ide2: none,media=cdrom machine: q35 memory: 36864 meta...

I've tested an Rocky Linux 9.4, what is normally the same like Rhel. Kernel 5.14.0-427.18.1.el9_4.x86_64 I've configured 32, 36, 40GB Memory. And it was working fine. But i had this machine configured with UEFI and TPM. Unfortunately, I don't know if it has anything to do with that, but I...