Search results

  1. E

    proxmox 7.0 sdn beta test

    Even with static routes I have issues. I manage to create a Simple Zone with VNet of course and one subnet for it 10.0.101.0/24 with gateway 10.0.101.254 And that's for VMs in Proxmox. Proxmox is connected with SRV VLAN 11 and has 10.0.1.1 MikrotTik Router is 10.0.1.30 in that VLAN User...
  2. E

    proxmox 7.0 sdn beta test

    There is lack of examples when using SDN with external Network like LAN for example. How to manage connectivity between LAN user -> Router -> Proxmox -> SDN -> VM
  3. E

    [SOLVED] apt blocked inside VXLAN

    How you manage to route traffic from VM (in VXLAN) to outside network (your local area network) any routing set on router or so on?
  4. E

    cloud-init and Buster generic image network problem

    I will stick to that also but my problem is a mention here https://www.toptal.com/developers/hastebin/unuwaligaf.yaml 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:1e:67:01:10:01 brd ff:ff:ff:ff:ff:ff altname enp0s18...
  5. E

    [SOLVED] SDN and outside PCs

    Could you share your setup? Also do you use subnet in VNet?
  6. E

    Best practice on how to assign IP address to management port

    I want also to stick to tak post because there is a bit issue with proxmox. Doing vlan awareness https://pve.proxmox.com/wiki/Network_Configuration auto lo iface lo inet loopback iface eno1 inet manual auto vmbr0.5 iface vmbr0.5 inet static address 10.10.10.2 netmask...
View older results
Top Bottom