Search results

I updated to pve-kernel-5.15, rebooted and within 5 minutes Proxmox crashed. I'm not sure what else to do? I have Proxmox 6.4-13 installed on an Intel NUC (using similar hardware) and it's been a work horse with several VMs running and no problems. I'm thinking about returning this ASRock NUC...

Okay. I had already disabled the: "CPU C States Support" but even after enabling various combinations of this and it's sub-settings Proxmox still crashes. Does this seem like something is dying? Before enabling the "CPU C States Support" I had rebooted and within minutes Proxmox crashed with...

Crucial BX500 2TB 3D NAND SATA 2.5-Inch Internal SSD - CT2000BX500SSD1 Crucial P2 2TB 3D NAND NVMe PCIe M.2 SSD - CT2000P2SSD8

Yes, I installed the latest BIOS (1.40 at the present) before installing Proxmox.

Memory test ran for 14 hours and passed with 0 errors but Proxmox is still crashing so I don't know. Since you experienced this problem with faulty USB drives is there a test I could perform on my SSD and NVMe M.2 drives?

Hello everyone! I've been using Proxmox on NUC's for a while now and recently purchased a new ASRock NUC Box 1165G7 then installed Proxmox 7.1 as a ZFS mirror on two internal disks (Sata SSD and NVMe M.2). I started experiencing odd things where pings and the Proxmox UI would stop responding...

This was my fault. I'm replacing one of my older Promxox nodes but using the same IP. Although that node is powered off I forgot to change the Static Mapping MAC address to the new Proxmox 7.1 machine's MAC address in pfSense. All is well now!

They are both wired connections to a Ubiquiti ES-24-250w switch on separate vlans with pfSense being used as the firewall and routing.

Hello everyone, I have a fresh install of Proxmox 7.1-7 with the WebUI being on a 192.168.1.0/24 network and I'm trying to access it from a 192.168.35.0/24 network. I have two older Proxmox machines on the same 192.168.1.0/24 network and I'm able to access their WebUI's from my 192.168.35.0/24...

root@proxmox2:~# cat /etc/hostname proxmox2 root@proxmox2:~# cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 192.168.1.5 proxmox2.jam.lan proxmox2 pvelocalhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0...

Unfortunately that did not work: root@proxmox2:~# pvecm delnode "192.168.1.4" 400 Parameter verification failed. node: invalid format - value does not look like a valid node name pvecm delnode <node>

Hello everyone, I'm folowing the: Remove a Cluster Node but when trying to delete Node 1 (powered off as well) from Node 2 I receive this: root@proxmox2:~# pvecm delnode 192.168.1.4 400 Parameter verification failed. node: invalid format - value does not look like a valid node name pvecm...

Thank you for this! I guess I'm confused on why Proxmox is mounting via systemd versus /etc/fstab? Is this the new standard when it comes to mounting?

proxmox2:~# ls /etc/systemd/system | grep .mount mnt-pve-backup_storage.mount proxmox2:~# cat /etc/systemd/system/mnt-pve-backup_storage.mount [Install] WantedBy=multi-user.target [Mount] Options=defaults Type=ext4 What=/dev/disk/by-uuid/f7b9d25a-2e74-42f5-9883-522269a332e7...

Hello Everyone, Using Proxmox 6.2-14, is there anything built in to Proxmox outside of: /etc/fstab that would cause my external USB HDD to mount after a reboot? I previously added this USB HDD under: Datacenter --> Storage --> Add --> Directory but it has since been removed and is not listed...

Since you are not able to separate the Ethernet Controller into a different group using the ACS override patch does that indicate through the NUC's design that it is perhaps "hard wired" to that grouping?

If you change: pcie_acs_override= to the specific device you want to be in a different IOMMU Group does that work? pcie_acs_override = [PCIE] Override missing PCIe ACS support for: downstream All downstream ports - full ACS capabilties multifunction All...

If your NUC has IOMMU Grouping like mine then you are correct and this would explain why you lose network when passing through the audio: IOMMU Group 11: 00:1f.0 ISA bridge [0601]: Intel Corporation Cannon Point-LP LPC Controller [8086:9d84] (rev 30) 00:1f.3 Audio device...

Thank you so much! I will give this a try.

Yes, that helps and thank you! So in order for these emails to complete I would definitely need to setup the SMTP settings in /etc/postfix/main.cf correct?