Search results

Hi, Recently I've upgraded to PVE 5.1 and I've seen the "Replication" new feature. As I see, it's only possible to do zfs replicas between cluster nodes and for me it would be great to be able to do replicas between two diferent datacenters (production site and disaster recovery site). As I...

Hi dietmar, I've done some more tests and you were right, it works. Now I'm doing a cpu stress using the command "stress-ng --cpu 2 --cpu-ops 50000" concurrently on many vm running at the same node (this command does 50000 bogo operations and then stops and gives the execution time). By...

Ok, thanks. I'll repeat the tests again. It's extrange, I changed the cpuunits in many VM on a node and I would swear that there was no difference. In fact, I tried to put a very high value to a VM and I did a cpu stress and I expected to see a big cpu usage on the node but it was the same as...

Hi, I would like to priorize some KVM VM over other ones. I've seen there's a "CPU Units" field in the "CPU Options" button that is available from the hardware tab on the KVM machines. From the help I read that this option allows to give more CPU to a VM, but, does this apply to KVM Virtual...

The usual way is to create the /Extra folder in your Mac ;-) But it's nice to know another way to do it. Regards

You can't set the network interface model from the Proxmox web GUI, you have to manually edit your vm file config and change the network interface settings net0: e1000-82545em=32:65:65:65:33:33,bridge=vmbr1 The important thing is to use " e1000-82545em". From Mavericks until now you can't...

Have you tried to disable the SmartArray Controller? I installed proxmox 3.3 on a HP DL180 Gen 9 server (with an unsupported raid controller) in Legacy mode using "SATA AHCI mode". I also installed a DL 360 Gen9 with a supported controller. I posted some info about that in the proxmox...

Hi, I'm trying to install Proxmox on a Mac Mini Server and I have some problems. I've failed to do the installation with proxmox 3.3, 3.2, 3.1. The setup complains that there's no disk. I've been able to install Ubuntu 14.04LTS and Debian Wheezy, so I've followed the procedure to install...

I've also needed to change the file /usr/share/qemu-server/pve-q35.cfg, to be able to boot the VM on proxmox. I first installed the VM following the Gabriel L. Somlo procedure from http://www.contrib.andrew.cmu.edu/~somlo/OSXKVM/ using kvm directly on a Debian Machine, after that I managed to...

Here is a sample conf: args: -machine q35 -netdev user,id=hub0port0 -device isa-applesmc,osk=PLEASE_REPLACE_WITH_YOUR_OSX_KEY -kernel /mnt/pve/ISOProxmox/template/bootloader/chameleon_svn2360_b oot -smbios type=2 -usb -device usb-kbd -device usb-mouse bootdisk: ide0 cores: 4 cpu: core2duo ide0...

Hi, I've been testing MacOSX 10.8.5 on Proxmox 3.2 testing with kernel 3.10 since august and it works fine. I use many cores and it seem to work fine. We have 3 proxmox nodes on Apple Hardware (MacPro 3.1 and mac mini) so we are respecting Apple's EULA cause we're virtualizing OSX on Apple...

I've instal.led Proxmox 3.3 on a HP DL360 Gen9. I had no problems, just create a RAID1 on the Hardware RAID controller, setup the system to boot in Legacy Mode and install Proxmox. It worked perfectly. I've been trying to install Proxmox 3.3 (and Debian, and Ubuntu...) on a HP DL 180 Gen9 and...