Search results

Can you give a bit more details on what you are trying to accomplish and you setup? As well as what exactly is the problem? Here is why, I run pfsense as my router and firewall replacement for my home now. My setup is local as in I run a small Lenovo desktop as proxmox server with a single vm...

Probobly because your controller is not supported. I have seen it with older dell raid cards before. If you can try to find a more common hba and try with it.

I thought it only apply when cluster is less than 4 nodes. Like you can not have a stable quorum with 2 nodes. You need 3.

Ahh I see. You have pfsense as your router. It should work than. I have a pfsense machine as a router on my home network and it works. But in my case the pfsense vm acts as all in one setup a router dns and dhcp. And it replaces a real router from my isp to my home network.

What is your internet on? Just because it works on your server. Didn't mean it should work on VMs without some intervention. #1. If your internet is on 192.158.1.x than you need to do some forwarding or translation. #2 if your dhcp is on .10.x segment you will need to add the vmbr0 to it and do...

No he meant that if vm is a webserver than you can use browser to access what ever web content it serves. A vm is a represententation of a pc. You access it just like any real pc. So if your vm up is x.x.x.7 you use that to connect to it. That said, before you can connect you need to install and...

R720 have a dedicated Ipmi port and Ethernet port. So you need to have an up for Ipmi/idrac and one for the server. Usually the idrac port is sitting on its own. And the network ports are 2 or 4 together. Read the manual and find the idrac port. Unplug it. Plug one of the internet ports in. On...

But of course. Just got to /eth/network/interfaces and check your settings. This is a debian after all.

It looks like kernel driver issue. I use to get this on my old Opteron setup. In your case it probobly the ryzen support. Maybe someone from proxmox devs will chime in with workaround.

I have never had issues with actual CD/DVD disks. A usb drive needs a little TCL now and then but cd always works.

What exactly do you mean by that?

Well I guess it depends on use and setup. I use ssds only for system. I have a mirror 1tb pool where I put my VMs and files. So system does not have too much writes I guess.

Well it greatly depends on what the setup is for, but at home I have been using consumer grade ssd for system disks for years. My strategy is getting disks from different manufacturing for pools. I am currently running proxmox build using one Intel 120gb and SanDisk 120gb. In mirror pool. For...

I am sorry but I have no suggestions here. I use AMD exclusively if I can. I just like them. Have been using their cpu for the last 20+ years if I could help it. Don't know your budget or location, but you maybe able to pickup a nice used server on eBay with everything you need for a reasonable...

With windows vm out of equation a nice 4 to 6 core cpu with 16gb should be more than enough to run at very least 6-7 VMs at light load or 4-5 at moderate load. And .If you can use the DVB-S .Card in lxc you may even have more resources left than with full VMs. Or do a full vm for video recording...

I am not 100% sure but you may not be able to swap them like this. Zfs may though a fit with different size replacement. As this is mirror setup. You can try attach and detach command but only if You can plug in new disks together with old obes. If not you are riskin loosing data. So backup is...

Hellio, Let me just clarify a few points before you run out and spend some cash. As i said before most hipervisors are not designed to do what you want. I.e. run a set of VMs and being a desktop. Now it is absolutely possible to have a setup line you want using Windows hyper-v But you may want...

Well, setup like you want is not possible with Proxmox and with most hipervisor. This systems are designed to do one thing and do it well. That is this systems are designed to do virtualization. Now there is only one hypervisor I know that can do setup like you are looking for. And that is...

I guess I need to be more specific sorry. You need to set a step by step plan of atac. So first thing first, Can you get to proxmox web ui. And I mean actually go and log in to it. If yes, check all the info. What/ how the VMs are setup and configured. What network config is there. Etc. Try...

Would you mind describing the setup more detailed? By internal network do you mean inside proxmox host only? Is so you may need to do some routing on the host. Not sure how it is done Proxmox. Maybe someone will chime in. I usually create 2 bridges on host. External and internal. Add both to...