Search results

I'm sorry to bother you with stupid questions, but I'm little confused about relaying, I've setup the Relayed domain as:TEC.....BAL.cl (this is the receiver domain) and used abuse.net to check relaying to gateway IP 200.6.78.91 and get the following >>> RSET <<< 250 2.0.0 Ok >>> MAIL...

Dietmar, Thanks for your answer. Example.com is domain used by mxtoolbox.com to test smtp remotely, my real domain is tec.....bal.cl (.....noglo), so what I need is that the gateway (proxmox) accept remote relay for email send to my domain tec.....bal.cl from Postini servers at network...

I'm still trying to work on this, I've setup postini to send all emails to my Proxmox Gateway, but I allways get "Relaying was not allowed for [xxx.6.78.91].", how do i enable the relaying, I have set the following: (MS Exchange 2000): Gateway Internal IP Address: 192.168.110.135 (external...

Hi Tom, Smarthost, I didn't find it, now is OK. regarding SMTP parameters, in another instalation with Postfix we set the following: # Number of simultaneous process default_process_limit = 300 # Max message size (20MB) message_size_limit = 20480000 # How long to wait to transmit the whole...

Tom, Many thanks for your soon answer, -Why I use two spam gateways is simple, I've to put something in between, and as we are using Proxmox VE, Proxmox gateway looks fine to use for it, and it has some very useful monitoring tools included. - I understand that I've to configure the firewall...

I've the following configuration: Internet<-->Postini<--(512KBPS)-->Proxmox Mail Gateway<-->Exchange 2000 Server<-->User Have somebody configured something like this, do you have any recommendation for this configuration. How do I must configure Proxmox gateway to accept and receive mails...

OK I did it, then was possible to completely delete the storage from console. Thanks

If I try to delete or disable it I get the same error; Error: command '/sbin/vgchange -aln ISCSI_Group' failed with exit code 5 But instead of direct deleting or disable it, I edited it, the select disable and save, it works, now I can open Thanks for your help. Regards from Chile

How can i do it safely?

iscsiadm -m node -R Rescanning session [sid: 1, target: iqn.2006-01.com.openfiler:tsn.086ad18522fe, portal: 172.27.110.128,3260] But same problem I'm currently don't have any guest using ISCSI drives, so could I remove any configuration for ISCSI? so PVE don't look for it.

Many thanks, but Same problem # dmesg | grep SCSI SCSI subsystem initialized sd 0:0:0:0: [sda] Attached SCSI disk Loading iSCSI transport class v2.0-724. scsi4 : iSCSI Initiator over TCP/IP isciadm -m node -R -bash: isciadm: command not found

lsscsi [0:0:0:0] disk ATA WDC WD5000AAKS-0 01.0 /dev/sda [1:0:0:0] cd/dvd HL-DT-ST DVD+-RW GSA-H31L W616 /dev/sr0

# vgscan Reading all physical volumes. This may take a while... Found volume group "pve" using metadata type lvm2

I did it, but still same problem, thanks ~# iscsiadm -m node session 172.27.110.128:3260,1 iqn.2006-01.com.openfiler:tsn.086ad18522fe # iscsiadm -m node -l ALL Logging in to [iface: default, target: iqn.2006-01.com.openfiler:tsn.086ad18522fe, portal: 172.27.110.128,3260] iscsiadm: Could...

Thanks for your soon answer, I get this: #/sbin/vgchange -aly ISCSI_Group Volume group "ISCSI_Group" not found # vgs VG #PV #LV #SN Attr VSize VFree pve 1 3 0 wz--n- 465.26G 4.00G

:D I was playing with ISCSI, I guess I kill :mad: something, and now when I try to open the hardware TAB of any KVM guest I get this error: :eek: [4751]ERR: 24: Error in Perl code: command '/sbin/vgchange -aly ISCSI_Group' failed with exit code 5 :confused: How can I fix this

Thanks for your comments, do you think this hardware is OK to support these services. Thanks Alfredo

I have an offer with a huge discount for 2 x Cisco UCS C210 M1 with: 2 x Intel Xeon X5550 4 x 8GB DDR3-1333MHz 1 x MegaRAID SAS 9261-8i 8 x 500GB SATA 7.2K (for VMs) 2 x 73GB 6G SAS 15K (for OS) I'd like to configure the two servers in a DRBD HA cluster to support the following...

I appreciate very much your very fast answer, but now that I've the problem, it's possible to manually remove the VM and iSCSI storage? Thanks again

First, many thanks for this very nice product. I've setup a Openfiler storage to test iSCSI, I'm using PVE1.4 Kernel Version Linux 2.6.24-9-pve #1 SMP PREEMPT Tue Nov 17 09:34:41 CET 2009, I created a ISCSI storage, then I setup a KVM VM using this storage, and it works perfect. Then I turned...