Search results

Now I've configured Boot Disks as ZFS and FSYNCS/SECOND is now 935, quite bigger, Is that better?

Curiously on thrird reboot it started ok,now is working And run pverperf, it's normal? CPU BOGOMIPS: 100821.96 REGEX/SECOND: 1202577 HD SIZE: 94.49 GB (/dev/dm-0) BUFFERED READS: 72.91 MB/sec AVERAGE SEEK TIME: 10.85 ms FSYNCS/SECOND: 36.58 DNS EXT: 50.80...

Bad Start, installation go with no proble, but on first boot I get the following:

Thanks for your soon answer, I'll start with V4. Any recommendation on Network or Storage configuration?, readings to start?

I'm receiving a similar configuration as a donation: - 1 x Flex Chasis - 2 x EN2092 1GB integrated switch - 7 x 240M4 nodes - 1 x EMC VNX5200 I'd like to build a HA cluster over this platform, any recomendation about network and storage configuration. As it's a new system and I think it will...

I've the same problem and some times the XP machines can't be started again and the OS seems to be corrupted

I'm getting a warning every 30 seconds in widows 2008 guest Reset to device, \Device\RaidPort0, was issued. event 129 source viostor. The machine looks OK, but I'm not sure what could be this, or if this can produce a problem This is a Dell poweredge 2900 using local disks and virtio driver...

Awesome guys! it looks incredible. I'll start testing. Merry Christmas and Happy new year for all the Proxmox team and many Thanks for your Great Work Alfredo

I delete the NFS from config, now I can access the hardware tab, and seems to work without problem, but when I execute the pvesm list -a in a node I get the following, unfortunatelly I can not remode this iSCSI share because we have some KVMs running on it, and is running in the same node PVE02...

Dietmar, Thanks for you help, but I don't think that is a permission problem, the NFS server is open. Anyway I'll remove the NFS and configure again, if the problem persist I'll tell you. Thanks and Regards Alfredo

Ok, I understand that, but on Master server is working without problem and /etc/pve/storage.conf is the same in all servers, And all backups are going to the NFS share, so I'll have to reconfigure all my backups. If there is not other solution I'll do it. Thanks for your Help.

When I try to create a KVM guest or open the hardware tab on a existing KVM guest on any node server I get this error: [5708]ERR: 24: Error in Perl code: 500 read timeout I've looked for in the forum, but I didn't find anything useful for this error: The configuration is a 3 nodes cluster...

The migration was not live, I stopped the appliance and then made the migration. You mean to downgrade the 1.6 from 2.6.32 to 2.6.18, then do the migration? Could be safe to migrate the machine to 1.7? I'm doing this migration because the 1.6 server is the master, and I'd like to promote...

When I migrate, from web console, an OpenVZ app running Joomla 1.5 from a server running Proxmox 1.6 (proxmox-ve-2.6.32: 1.6-24) to other running Proxmox 1.7 (proxmox-ve-2.6.32: 1.7-30), the Mysql included doesn't start on boot , i started it manually and works, previously to the migration it...

I'm sorry for my delay to answer, I was out for some days, here is the pveversion, is the same I sent at the begning, by the way where can I dowload a signed virtio driver, I'm using win 2003 R2. So is better use virtio or e1000? Thanks for your comments Regards Alfredo pveversion -v...

No comments about this? Please give me a guide to solve this problem. Thanks Alfredo

Thanks for your answer: My Promox VE is located on my local network, and is a 2 server cluster based on HP DL360G6. I've installed a Ubuntu 10.04 KVM and had the same problem. /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address...

I've just setup a windows 2008 guest, it works very fast, but I had problems with networking, Windows 2008 detects network cards and network connection (pluged), but never get IP by dhcp, I set a static IP but no network connection is possible (Unidentified network). Other guests openvz works...

But is possible to use shared storage for Openvz VM, and store Opnevz VM in a ISCSI storeage like OpenFiler or Nexenta, to have faster migrations, thanks for your comments. Best Regards Alfredo

Thanks TOM, i did't, in options I uncheck "Use SPF" but still have the same result Best Regards Alfredo