Search results

For this I would create a new Linux bridge in Proxmox, you could use vmbridge1 if it is not in use already. You don't need VLAN's for this since you will not be passing this network out to your switch. VLAN's allow you to pass multiple networks between switches while using only a single link...

I have two windows server 2012r2 VM's, one Free BSD VM, and one Linux VM. All are working fine using the Intel e1000 virtual NIC with three host interfaces in the LACP bond. These VM's cannot communicate with devices outside the host when using VirtIO NIC's and more than one host interface is...

MIr & Fireon, thanks for the help with this. It appears I have been barking up the wrong tree. Since this system is remote, I have re-configured the network so that the Proxmox IP is assigned directly to the eth0 interface and I have put the bond on eth1-3. This allowed me to play with the...

I am having problems with a four port bond using LACP. The switch is configured for LACP and I can access the Proxmox IP on vmbr10 without issue. The problem is that the VM's have no network access if more than one of the four interfaces are plugged in. The server is a Dell R710 with four...

This is my current iteration of the vmid.conf bootdisk: virtio0 cores: 2 hostpci0: 04:00,pcie=1,x-vga=on machine: q35 memory: 2048 name: backdesk-workstation net0: e1000=00:30:48:D5:6D:02,bridge=vmbr0,tag=10 numa: 0 onboot: 1 ostype: win7 parent: Pre_ATI_Driver sata2...

I have tried the various iterations of the wiki configs and unfortunately none of them work with the ATI drivers. The only one I haven't tried is the OVMF method. I don't think I can use that one because my MSI R5450 card does not appear to support UEFI. I did find this site with a link to...

Thanks for the clarification on this point. I was reading that as being relevant to pci not pci express. I followed the pci express passthrough section just below that. Also, is it possible to address a pci express video card as a pci card from the VM. In other words, can I follow the pci...

Although it may be hard to believe I did actually follow the wiki. I began deviating from the wiki in an attempt to get the ATI sourced drivers working. I did not realize that that pcie=1 was a boolean. I didn't see anything in the wiki stating that or indicating what the pci= 1 feature is...

Here is the VMID.conf file of the semi working passthrough. boot: c bootdisk: virtio0 cores: 2 hostpci0: 04:00.0,pcie=1,multifunction=on,x-vga=on hostpci1: 04:00.1,pcie=2 machine: q35 memory: 2048 name: backdesk-workstation net0: e1000=00:30:48:D5:6D:02,bridge=vmbr0,tag=10 numa: 0 onboot: 1...

I have a new server with a X10SDV-TLN4F Xeon D mainboard running Proxmox 4.1. I am trying to get GPU passthrough working with an ATI Radeon HD 5000 and windows 7. I have it working with the built in windows VGA drivers but it bluescreens when I load the the ATI drivers. I have seen reference...