Search results

Because my Linux desktop will not work with Splashtop for remote control I have spun up a Windows 7 Pro guest however this does not work either. Splashtop displays an error and their kb indicates it is due to DirectX missing...

Hi Dietmar, just wanted to close the loop on this one in case someone else goes down the same path. As you suggested I spoke to the Naverisk support team and they immediately escalated the issue and now have their agent working on Proxmox installations. This is a great tool for monitoring...

Hi Dietmar, I could not understand it either however regardless the installation still fails. From the output above can you suggest what may be required to get it working?

Hi, We are looking to install a server monitoring agent on Proxmox however the installation fails. The agent is compatible with Ubuntu & Debian, however, the supplier has advised that Proxmox is not a supported platform. Whilst the agent appears to partially install it is unable to be started...

How do I set the env variables in a Ubuntu container? it appears the contents of /etc/environment are being ignored.

Thanks Richard but the problem cannot be the VPN as all other hosts on the same LAN can be accessed over the VPN. Only the Proxmox guest VMs are inaccessible.

I have a remote LAN that I can access via VPN. The LAN has a series of web servers and a PVE installation with 2 guest VMs, pfSense & Nagios. Over the VPN I can ping every server, PVE and the guest VMs. Over the VPN I am able to access every web server however I am unable to access the web...

I have an interesting problem that has me stumped. I have two subnets connected by a VPN. Office & Remote At "remote" I have a physical server and some VMs on PVE. From any@office I can RDP to server@remote From any@office I can ping server@remote From any@office I can ping pve@remote From...

I have used iSCSI targets with single LUNs previously without issue however I now have a taget with two LUNs yet I cannot see how to reference the LUNs individually. I can connect to the iSCSI target in pve yet only see one LUN listed.

I see the first disk has reported no errors for the short and long tests: SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8154 - # 2 Short offline Completed without error...

root@pve:~# smartctl --all -d megaraid,3 /dev/sdc smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.44-1-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 PRO 2TB Serial Number...

root@pve:~# smartctl --all -d megaraid,2 /dev/sdc smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.44-1-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 PRO 2TB Serial Number...

The backup log reports: INFO: status: 8% (68275142656/852551008256), sparse 0% (1875738624), duration 1041, 54/53 MB/s INFO: status: 9% (76751568896/852551008256), sparse 0% (2160574464), duration 1197, 54/52 MB/s INFO: status: 9% (79479046144/852551008256), sparse 0% (2205278208), duration...

I have a Windows VM running on LVM and a few days ago the backup started failing reporting disk I/O errors. The VM continues to run perfectly. I have run a chkdsk in Windows and no errors were reported. I am unable to move the disk to another storage group as at 49% I/O errors are reported...

Our PVE server has 2 nics, one for internet and one for internal LAN We run pfsense as a VM and all works well. I would now like to add a VM in a DMZ however am unsure of how to create the DMZ. I imagine I would require a 3rd linux bridge that the DMZ VM would connect to however as I already...

Thanks again Wolfgang, I have been reading: http://www.admin-magazine.com/Archive/2014/20/Best-practices-for-KVM-on-NUMA-servers Does this all mean that the optional VM CPU configuration is actually dictated by NUMA? For example: as I have two CPUs each with 16 cores and 160GB RAM then each...

I'd like to pretend I never asked this one... root@pve:~# mount /dev/cdrom /media/cdrom mount: /dev/sr0 is write-protected, mounting read-only

Thanks Wolfgang. I am interested to learn the logic behind these allocations as we have multiple Proxmox installations each with different configurations. The server I referred to above has 160GB in 10 X 16GB RDIMM. We allocate 32 GB to each Windows Server VM.

Thank you. My server has 2 X E2630v3 CPUs http://ark.intel.com/products/83356/Intel-Xeon-Processor-E5-2630-v3-20M-Cache-2_40-GHz Is the best config for a Windows VM always nX1?

Hi Wolfgang, could you please explain why 6X1 is better than 3X2 or 1X6 etc