@Spoonman2002 I fixed added tagged on the switch for port#3 first (initially it wasn't like that, I edited the question here too) and then fixed the workstation's network settings that was trying to access Proxmox. I understand the whole thread doesn't give much insight and the solution isn't...
Thank you for your answers. Because I followed this tutorial https://youtu.be/ljq6wlzn4qo and same config is in Proxmox documentation, that's why.
Both puts the address and gateway under vlan. I'm not trying to be stubborn. My objective is to be able use vlans on Proxmox and create separate...
This is the output
# ip r
default via x.x.x.1 dev vmbr0.33 proto kernel onlink
x.x.x.0/24 dev vmbr0.33 proto kernel scope link src [redacted]
# dig debian.org
;; communications error to [my-dns-server]#53: timed out
Same thing happens when I use 1.1.1.1 as dns. Proxmox can't access outside.
@Spoonman2002 Do you mean the `/etc/network/interfaces` file on Proxmox server? But every example I looked at, has the Gateway on vlan and NOT on `vmbr0` even the Proxmox documentation. See documentation at https://pve.proxmox.com/wiki/Network_Configuration > VLAN 802.1Q > Vlan on the Host...
WAN port on the slave router is part of regular LAN, see below;
# robocfg show
Switch: enabled gigabit
Port 0: 1000FD enabled stp: none vlan: 1 jumbo: off mac: [redacted]
Port 1: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 2: DOWN enabled stp: none vlan: 1 jumbo...
I'm trying to setup `vlan 33` with a single nic on my proxmox server. I have the below configuration on my `/etc/network/interfaces` file.
auto lo
iface lo inet loopback
iface enp2s0 inet manual
auto vmbr0.33
iface vmbr0.33 inet static
address [redacted]/24
gateway [redacted]
auto...
In the https://pve.proxmox.com/wiki/Network_Configuration page, under "VLAN on the Host" section, "Example: Use VLAN 5 for the Proxmox VE management IP with VLAN aware Linux bridge" shows the configuration for a single NIC and it's easy to understand. However the following snippet, starting with...
What worked was adding below permissions on the api_token as explained here;
https://<your_beloved_proxmxo>:8006/pve-docs/chapter-pveum.html#pveum_roles
/storage (I gave data admin on this one)
/vms (I gave Admin on this one, probably only needs VM.Clone but you can adjust by trial/error and...
this didn't work even tough I specified the `api_user` as `Administrator` on the vm template permissions. I still got a `Unable to clone vm xyz from vmid 9000=403 Forbidden: Permission check failed`
Hi,
First of all Proxmox is the best!!! Thanks for your hard work.
I'm trying to configure cloud-init and clone an vm from that template (with Ansible). No matter what I do, I couldn't get my cloud-init working.
Step by step;
- I download and prep a Ubuntu 22.04 image...
@Stoiko Ivanov thanks for your reply, here's what I did on the node;
[centos@worker ~]$ sudo firewall-cmd --add-port=8089/udp --permanent
success
[centos@worker ~]$ sudo firewall-cmd --reload
success
[centos@worker ~]$ sudo tcpdump udp -i ens18 -vv port 8089
dropped privs to tcpdump
tcpdump...
Having the exact same problem. Proxmox logs below error message in Syslog.
Jan 24 20:17:10 proxmox pvestatd[1105]: qemu status update error: metrics send error 'proxmox': failed to send metrics: Connection refused
Jan 24 20:31:20 proxmox pvestatd[1105]: qemu status update error: metrics send...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.