Search results for query: Intel 620

lspci -vnn 00:00.0 Host bridge [0600]: Intel Corporation Coffee Lake HOST and DRAM Controller [8086:3e34] (rev 0c) Subsystem: Lenovo Device [17aa:2279] Flags: bus master, fast devsel, latency 0, IOMMU group 1 Capabilities: [e0] Vendor Specific Information: Len=10 <?>...

Hi all, I’m running Proxmox on an old laptop and have successfully passed through the Intel iGPU to a Windows VM. The VM boots fine and video output over HDMI to a TV works perfectly. The only problem is audio - it does not seem to get passed with the PCI device. Maybe someone has faced a...

You are right, but heise.de is answering from the rest of my home network, but not from the proxmox-server: root@pve:~# ping www.heise.de PING www.heise.de (193.99.144.85) 56(84) bytes of data. From i59F4C413.versanet.de (89.244.196.19) icmp_seq=1 Packet filtered i tried to show in my first...

Ich habe in den letzten Tagen wiederholt (2 oder 3x in den letzten 2 Wochen) einen Crash einer VM erlebt, die bisher recht zuverlässig gelaufen ist. Die VM läuft auf einem AMD Ryzen Node. Fehlermeldung: Jul 09 06:50:47 evcc kernel: BUG: unable to handle page fault for address: ffffffffaf67d513...

I did a fresh install of Proxmox 8 on my 4930K system (running on an Asus P9X79-E WS motherboard, with 64 GB of DDR3-1600 unbuffered, non-ECC RAM) on an Intel 520 series 512 GB SATA SSD. (Not that it really matters, but I also have a Quadro 620 for basic video output because its the only other...

Hi all, I'm having issues backing up PVE to PBS, it's very slow and inconsistent write speed. To backup a VM with 300Gib disk takes over an hour. PVE - Lenovo P520 Xeon(R) W-2255 CPU 190 GiB DIMM DDR4 2666 MHz GeForce RTX 4060 Ti 16GB Vms data are stored in ZFS 3x SSD SanDisk X300 DC Raidz1...

...blacklist i915 cat /etc/modprobe.d/vfio.conf options vfio-pci ids=8086:5916 disable_vga=1 The HDMI output gets highjacked the moment I boot the VM. I also detect the iGPU 620 inside the VM as an intel 620. The monitor, however, still detects no output signal. What am I doing wrong?

I am currently making a VM with Windows 11 IoT Enterprise LTSC using SeaBIOS to try this on my HD 620. I am wondering what machine type you used?

Same issue -> Linux works just fine with a full passthrough, but windows doesn't recognize the monitor. It does recognize the Intel HD 620 though

Hi everyone, I was recently experimenting with Proxmox and came across the following problem: The server was a laptop. The built in display uses an Intel HD 620. I want my VM to use the Intel HD 620 and output on the devices screen. To do so I activated IOMMU and followed the steps for iGPU...

Here are my own tests using kernel 6.8.8.2 with the OOT ixgbe 5.20.9 on the Qotom Q20332G9-S10 device along with some Minisforum MS-01 devices that have an Intel X710 controller that works with the default kernel drivers. Also, I'm using DAC cables with an ICX 6610 switch and leaving the...

Hello all, strange problem this morning after upgrading form 6.5.13-5 to 6.8.4-3. Impossible to have intel HD passthrough in lxc containers. After seeking i found that there's no more /dev/dri and especially no /dev/dri/renderD128 i usually map in the LXCs. reverting back to 6.5.13-5 and...

Hi all, We are noticing that offline migrations are a lot more resource intensive than live-migrations. Because of this, when we perform offline migrations running VMs on the destination node are experiencing I/O delays. We are using lvm-thin storage. Disks are 6 Intel D3-4620 SSDs in RAID10...

Hi. Im trying to pass the pci device "intel graphic 620" to a windows 11 VM. I try with debian VM in this way: This works perfect. I can use the VM in the proxmox host (i mean, with a monitor attached to the proxmox server i can work in the vm like if the VM was... not virtual) I try the...

It is obvious from this & the above linked forum post I mentioned, that the kvm version of the Ubuntu cloud-init image doesn't play well. Concerning your i915 pci drivers, this is a Ubuntu focused problem, not a HV/Proxmox one. Neobin has linked a post that in all likelihood will help you, if...

Ah! Progress! My guest VM was created using the jammy-server-cloudimg-amd64-disk-kvm.img, but after recreating the VM using jammy-server-cloudimg-amd64.img I was able to pass through the iGPU and have it boot correctly and the guest VM correctly list the Intel HD Graphics 620 as expected...

Are you sure that ```lspci -nn``` isn't just listing that my laptop is using the same Host Bridge chipset as the Xeon E3-1200 v6/7th Gen? When I run the following command it reports the correct CPU and all of its features as expected. root@dell-proxmox:~# lscpu Architecture: x86_64...

iGPU stands for Integrated Graphics Processing Unit - as opposed to a discrete graphics solution which is a separate card/chip from the CPU. AFAIK there exists no Xeon E3-1200 CPU family that has an iGPU. AFAIK HD Graphics 620 only exists in an iGPU solution. So something is wrong either with...

I have a VM where there is no network when I pass through a GPU and when I remove the GPU there is network. I believe I've setup IOMMU correctly, but please double check my work. I believe I'm running grub as my bootloader. root@dell-proxmox:~# proxmox-boot-tool status Re-executing...

Hello! I am trying to solve an issue on my NUC7i3BNH where GVT-g doesn't seem to work. CPU: 4x Intel Core i3-7100U GPU: Intel HD Graphics 620 16GB RAM /etc/modules: GNU nano 7.2 modules # /etc/modules: kernel modules to load at boot time...