Search results

Hi, After I disconnected the symlinked disk ,there are 9 disks in the host. But warning message still appears: The info on screen is below : " Attach file " And the host syslog is below: May 06 11:37:11 p1 kernel: ata1: lost interrupt (Status 0x50) May 06 11:37:11 p1 kernel: ata4: lost...

Thanks a lot , I get the symlink to the disk. Have a good day!

Hi, My PVE host with 10 disks starts , appear follow info: " May 05 14:30:46 p1 kernel: ata4.00: exception Emask 0x50 SAct 0x0 SErr 0x40d0802 action 0xe frozen May 05 14:30:46 p1 kernel: ata4: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } May 05 14:30:46 p1 kernel: ata4.00...

Does anyone have the same problem? In the vm in pve7.4, the sound card in it cannot be recognized normally; What patch is needed? Thanks for informing.

Thanks,I will have a try.

After I changed the audio and display to spice, the vm can start, but right click on the console of the resource tree on the right to open the window, and directly download the ‘ pve-spice.vv ‘ file, but the independent window cannot be displayed. Moreover, I found that the mouse cursor was...

Thanks a lot. I will learn more from masters in the future.

First thank you for answering my question. I removed the audio device,resume the VM,say'OK',but green triangle logo on left is not appeard. The CLI input 'qm status 108' says: 'status: prelaunch' The VM configuration is belowed: boot: order=ide0;net0 cores: 4 cpu: host ide0...

On one same machine,I reinstall PVE from 7.0 to 7.4. One vm had hibernate file ,when I resume it ,says "Resuming suspended VM activating and using 'p0nvme:108/vm-108-state-suspend-2023-04-04.raw' as vmstate audio: Could not init `spice' audio driver TASK ERROR: start failed: QEMU exited with...

I use ventory tools U-disk to install PVE 7.0 & 7.3,issue happend.After I pressed Ctrl+Alt+F2 to see detail information, The following screenshot shows，Who know that reasons? Thanks a lot.

Enn...Thanks.

Oh,thanks

A culster has 3 hosts , one of them was shutdown . No IPMI can be used , and I only can remote access the other 2 hosts. Is there shutdown-host'mac address in somewhere or config-files? Thanks! Best Regards!

I just remote access the cluster. And the machines have not IPMI. Can anybody know how to deal with this issue? Thanks! Best Regard!

I just remote access the cluster. And the machines have not IPMI.

My PVE cluster has three hosts.One of hosts was not set "pvenode config set -wakeonlan XX:XX:XX:XX:XX:XX",and it is not running. Can wake on this host through other measure？ Thanks for helping ! Best Regard!