Search results for query: 192.168.100.2

Also, I just tested and if I have a 9.0 server setup this way and I and I upgrade using apt-get update apt-get upgrade apt update apt dist-upgrade This gets me to 9.1.5 and my servers continue to work fine after this. This seems to only be an issue with a fresh install of 9.1

Thank you for the reply. That is how I have it set up. This works with a fresh install of 9.0 but not a fresh install of 9.1 my config is as follows" auto lo iface lo inet loopback iface ens1f0np0 inet manual mtu 9000 iface ens1f1np1 inet manual iface ens2f0np0 inet manual iface...

Hi @Impact Here's my storage.cfg: Hi @bbgeek17 - VM configuration: qm config [id] - raw VM configuration: cat /etc/pve/qemu-server/vmid.conf - storage status: - if you have block storage: lvm; lsblk Don't think I have that? - volume list: pvesm list [storageid] Where do I find...

Greetings! I have a PVE and PBS setup (both on latest versions). The PBS is configured as backup for the PVE, no network intermediate in between (PVE and PBS are in the same /24 network). Both have zfs as file system. I have a recurring backup scheduled for most of my VMs and LXCs which is...

Hi there, I have a proxmox setup with 3 VMs (Home Assistant, PBS and OMV), and a LXC (pihole) PBS was rececently installed for backups, obviously. I just configured cron to start the PBS VM (105) minutes before the backup jobs start, and to shutdown after the jobs are done, well, for that I...

ZFS over iSCSI: Multipath alternatives I’m using Proxmox “ZFS over iSCSI” with a remote Ubuntu storage server (ZFS pools exported via LIO/targetcli). After reboot I noticed something important: - VM disks still work - But iscsiadm -m session shows no sessions for the ZFS-over-iSCSI storage -...

Hello all. I am currently running a single node with version pve-manager/9.1.4/5ac30304265fbd8e (running kernel: 6.17.4-2-pve). My previous Proxmox v8 cloud-init configuration was carried over from the v9 upgrade and was working just fine. Earlier this week, I started configuring integration...

Hi @fiona , Thank you for your answer. Task log: 2026-01-23 13:21:48 starting migration of VM 99998 to node 'proxmox3' (192.168.1.58) 2026-01-23 13:21:48 found local disk 'raidsystem:99998/vm-99998-disk-0.qcow2' (attached) 2026-01-23 13:21:48 copying local disk images 2026-01-23 13:21:50...

Hi everybody, I built a small cluster with 3 hosts. Each of them has a ext4 partition mounted to /raidsystem used as storage for the VMs disks. If I shutdown a VM and migrate it from one host to another, I get a failure: 2026-01-23 13:21:48 starting migration of VM 99998 to node 'proxmox3'...

...it permanently. My config: - host Fedora: 192.168.88.0/24 - VMware Workstation with Proxmox: NAT (vmnet 8) 192.168.100.0/24 (gateway 192.168.100.2) - Proxmox two adapters: as on the screen above - Windows VM: IP/DNS from DHCP 10.10.10.X - firewall on Proxmox OFF. The solution has been...

cat /etc/pve/storage.cfg dir: local path /var/lib/vz content backup,iso,vztmpl lvmthin: local-lvm thinpool data vgname pve content rootdir,images nfs: store01 export /store01 path /mnt/pve/store01 server 192.168.98.101...

...MANUAL or DHCP, the problem remains the same: - no internet connection, - ping to GUI at 192.168.100.128 - ping does not go to WAN outside Proxmox or to gateway 192.168.100.2 5. /etc/network config: Please ask any additional questions you may have so that we can debug the problem...

I personally would not pass through the hardware. The way I do it with pfSense on my Proxmox machine is I assign each nic to a bridge, then I put each virtual NIC on the VM into the appropriate bridge. I think Proxmox does a better job of handling the hardware, and almost every VM takes virtual...

I converted my ISP-provided router into a modem. It just converts from fiber to ethernet. It's chained to my router, which runs Openwrt. The Openwrt router handles PPPoE and gets assigned the IPs. It has 3 VLANs, all on separate subnets: VLAN 10 (LAN) (IPv4 Only) (192.168.1.0/24) - All my...

I encountered an odd problem on PVE8 and after upgrading, also on PVE9. I have a NFS storage server on IP 192.168.100.100 and my PVE instance on a different vlan at 192.168.200.100. For NFS I have created rules for the ports 111 833 2049 and 60375 (at the moment). Occasionally, the NFS share...

Hi，heros I encountered a problem, and it has been happening more frequently lately. **Hardware:** PVE version 9.0.3, E5-2640v4 * 2, 128GB RAM, and 2 SSDs------------and 1 stupid m.2 nvme SSD [may be the problem is] **Symptoms** The server becomes unresponsive randomly: 1~7days When it happen...

You are right, but heise.de is answering from the rest of my home network, but not from the proxmox-server: root@pve:~# ping www.heise.de PING www.heise.de (193.99.144.85) 56(84) bytes of data. From i59F4C413.versanet.de (89.244.196.19) icmp_seq=1 Packet filtered i tried to show in my first...

dir: local path /var/lib/vz content vztmpl,backup,iso lvmthin: local-lvm thinpool data vgname pve content images,rootdir dir: Bay1_3_Verbatim_1T path /mnt/pve/Bay1_3_Verbatim_1T content backup,images,vztmpl,snippets,rootdir,iso is_mountpoint 1 nodes pve...

here's what ip route shows but I can't ping the firewall at 10.0.0.1. I can ping it from one of the vm's. those are on vmbr1 which doesn't have an ip, it's assigned in the vm's directly. root@perko1:~# ip route default via 10.0.0.1 dev vmbr2n proto kernel onlink 10.0.0.0/23 dev vmbr2n proto...

Hello, This is a fresh Proxmox 9.1.4 installation on new hardware. Everything is default as possible. After putting in over 10 hours trying this out, and exhausting Gemini, I need help. Why are my VM’s networking not establishing a network connection? Proxmox does not show the VM’s MAC...