Search results for query: 192.168.100.2

Thanks for clearing that up, wan't sure about this. But then - when using `curl --interface <INTERFACE> 1.1.1.1`, does the command still use the default route, causing connectivity issues when the interface specified is non-default? My understanding was that if I had an interface on the 815...

Komischerweise ging es dann, weiß jetzt gar nicht, wo es geklemmt hat.. Habe dann einen längeren Dialog mit Google KI geführt (bitte nicht gleich hauen) und habe nun eine nftables config nach meinen Vorstellungen (Internet Whitelist, Zugriff auf Routernetz für VMs, RDP vom Routernetz auf das...

yeah - looks good... the other stuff: if you have pvid 1610 you don#t need vmbr0.1610 - because the default vlan of vmbr0 is then 1610 untagged... default routes: normally you only have one default route - other default routes are maybe for backup purposes. so if you have: default via...

I am not entirely sure what you mean, but here's my setup: I set up two VMs with each one NIC with VLAN ID 11 and one NIC with VLAN ID 22. VLAN IDs 11 and 22 are not used anywhere else in my network and thus should also not be allowed by the unifi switch trunk port. Upon creation, both did not...

Yesterday, I changed my proxmox network configuration before I got your response. I did this because I read online that it is not good practice to have a proxmox PVID that is not equal the native unifi swtich port's VLAN ID. If I am understanding correctly, having the default proxmox vmbr0 PVID...

You have a possible race where "pvesm" status is possibly not yet propagated to PVE cluster view. I've asked Claude to help you, obviously I have not tested this for you. Good luck #!/bin/bash # ─── CONFIG ────────────────────────────────────────── NAS_MAC="AA:BB:CC:DD:EE:FF" # Replace...

For the better understanding of my target, I can reduce the setup to a single node - typical home setup: Current example setup: - vmbr0: 192.168.178.250/24 - connected to WAN (gw: 192.168.178.1) - VM100 has 192.168.178.100/24 configured and is also in vmbr0 Switched Setup to EVPN: - the EVPN...

Hi there. Have a proxmox with some VMs 100 Home Assistan 105 PBServer which I only start few moments before backups are schedulled have a LXC also, pihole. have 2 backup jobs schedulled with same config, even though in the log the config appears in different way, although matching. I also...

hallo Forum, ich habe kürzlich von einem Container wo ein Ubuntu mit Wireguard läuft die Festplatte verkleinert. Ging alles gut und habe auch danach ein manuelles Backup gemacht. Anschließend diese Maschine in den Backupplan eingefügt. Nun kommt aber schon wieder ein Fehler den ich nicht...

Vielen Dank für die konkreten Tipps! Meine Rückmeldungen dazu: Version: v0.107.72 root@pve0:~$cat /etc/pve/lxc/231.conf #<div align='center'>AdGuard LXC #</div> arch: amd64 cores: 1 features: keyctl=1,nesting=1 hostname: adguard memory: 256 net0...

Hi, first of all, thanks for the response, now let me rephrase what I said and elaborate a little bit. I'm currently trying to self host a terraria server for me and some close friends, hence the port forwarding. Next, the part where I said "forcefully making me input a connected device and port...

I have just enabled the SDN in my PVE, allowing containers ans VM's discovery each other by hostname. However, the SDN interface is quite confusing... Take the screenshot below as example, in the IPAM page Column "Name / VMID", don't show LXC/VM name or hostname. Reading would be improved if...

Dear readers, I'm having similar issues with server.guru for PVE9. I'm having a dedicated server with an additional IP. the "primairy" ip is used for management, the additional IP is for a (linux) VM. The VM should get the dedicated additional public IP for its own (and reachable from...

When the first crash occoured I had this Problem: [ 5880.143371] igb 0000:05:00.0 nic1: NETDEV WATCHDOG: CPU: 6: transmit queue 1 timed out 5021 ms I switched to proxmox two weeks ago. Before proxmox i had OMV (Debian) with 6.1.0 on the system and no poblems. This is the error message from...

It seemed that I had solved in the live migration of the VM but it repeats this rorry that I do not understand .... Sometimes it signals me that the conntrack is disabled sometimes not ! 2026-02-24 16:44:52 migration active, transferred 4.1 GiB of 8.0 GiB VM-state, 110.2 MiB/s 2026-02-24...

Typical setup is INTERNET/WAN <-----> Firewall <----> PMG <----> Mail server So with your firewall just create a NAT rule that routes port 587 to your Mail Server, not your PMG. This makes sense anyways because PMG just checks incoming and outgoing mail, 465, 587, 143, 993 are ports used for...

Hello, I've encountered an issue where conntrack seems not to work when the VM that is being migrated has HA enabled. I have tested different HA Shutdown policies, but it doesn't seem to make a difference. I've also tested disabling the host firewall, enabling the firewall but allowing...

Yes It works and persistent thanks. The only downside is that each time I add a vnet, I have to do the same thing again, and also for the dhcpmasq service.

currently the gateway ip from gui is only apply to simple zone && evpn zone as the ip is pushed on the vnet on all hosts. (or you could have ip conflict on layer2 zones like vlan,vxlan,....) you can add an ip with add in /etc/network/interfaces of the node iface vnet100 address...

I tried your method. I configured the gateway in the subnet as following : But the gateway IP was not applied to the vnet. Without the gateway on the vnet, the dnsmasq dosn't work. I have to apply the IP manually using "ip addr add 192.168.100.1/24 dev vnet100". Do i miss something ? Thanks