Search results

Ok, so after I fix this whole performance and core issue, I'll try to reinstall Windows with SCSI. Yes, the MacOS VM will not do too much when I use the Windows VM. I'll now check it out, and see if it matters at all. Thanks for all the help.

Ok, thanks for all the explanations. So the correct settings is basically to give each VMs 2 cores? Or is that not good either, because you said that proxmox needs at least a core for it, so basically give one VM 2 cores and the other one core right? I thought thats what you say, Windows uses...

Thanks for the reply. I'm not really planning on adding any more VMs or CT until I increase the RAM, that's also why I gave it my all for these two VMs. In Windows VM I have the balloon service active and working I see it reports correctly to Proxmox the amount of RAM used. But I really...

Hi, I've been trying for a few months to make this work properly and I'm so close but now I have the biggest problem of all Poor performance! So, what I'm trying to do is one Windows VM for games And one more VM for everyday use that MacOS is on and I connect via Parsec to the Windows VM...

Hi, I need help to change the vendor id to something else while I pass my PCI NVME to the VM and change the vendor id only for this device and only in this VM. I mean it must only be in the config of this VM. What do I need to add/change to make it happen? Thanks in advance Itay

Were you able to do that?

Ok thank you. Tomorrow I will probably buy the M.2 SSD so I will know if it will be possible. Thanks for all the help

0.78 is the maximum. like I said I do not think it's the problem. it's either something in Proxmox that caused a crash or something in Windows. Tomorrow I will try to install the same installation of Windows (I have an Acronis backup of this installation of Windows so it will be the same) but as...

I would love English next time :) But such a thing would just be very slow no? Could it crash the whole VM without a clear explanation? But I have a hard time believing that this is the problem anyway because this is a reliable SSD. And it doesn't cause problems if I use it with Windows...

Okay, great so I should expect the same performance. Thankfully I have almost one to one performance from bare metal so I get almost all the performance from the SSD. I know if I want real passthrough I need to do PCI passthrough But the Proxmox disk is also in this controller so this is not...

Thanks for the comment. I had a feeling that in my case LVM would be better. So thesis's probably what I'll do if I'm unable to pass the disk directly to the VM. Just another little question: In relative to passing the disk directly to the VM and use the LVM then image as a disk, how much...

Hi, so because of what's happening to me (described here) I'll probably have to give up passing the disk to VM... (if anyone has a solution for this, it would be best) So I thought of just using an SSD through the host (as usual) and not pass it to a VM. The question is what to use? LVM or ZFS...

Hi, everyone I pass a sata SSD that already has Windows 10 installed on it to a VM on Proxmox. And after Windows recognized the hardware again the system start up and everything looks alright... but when I log in to my user so after a few seconds / minutes the VM just shuts down. Like I pressed...

Anyone know how to help me with these things? :)

I'm sorry to let you know but from what it looks like you'll never be able to separate them (hope you prove me wrong) They all seem to be connected to the same PCI bridge, so even though their IDs are different they are basically in the same group forever. This is how this motherboard was...

Hey, So I installed MacOS big sur on VM. With the help of this guide: https://www.nicksherlock.com/2020/06/installing-macos-big-sur-on-proxmox/ And I used this OpenCore config: https://github.com/thenickdude/KVM-Opencore On top of that, I did a PCi passthrough for the GT 710 I have and it...

From what I understand, in order to output from iGPU, you need a special ROM for it. There is this project: https://github.com/patmagauran/i915ovmfPkg That needs to solve this whole problem (that I don't understand why there is a problem from the beginning, and why it just don't work like any...

Hello again.... So after an in-depth internet search (I searched for hours upon hours) I found something that might help me: https://github.com/patmagauran/i915ovmfPkg In short, someone there gave me a line to add to the VM - args: -device...

So... does anyone have an idea why I do not get a screen output when I try to passthrough the IGPU to VM? I'm doing a clean install of Proxmox maybe this will help ....

Do you have an output to the screen from the Intel card?