Search results

Nevermind, I think I got it working. I also forgot to set the machine type to q35. I was also able to get the Win10 guest updated to win11. My pcie USB3 host controller is passed to my guest and I see the 2 usb cameras attached to it now. root@proxmox / # qm config 112 bios: ovmf boot...

I have a usb3 pcie card in a Dell R710 that I'd like to passthru to a Windows guest. I can't passthru usb devices connected to the pcie card because the Dell isn't recognizing any devices plugged into the card's ports. (assuming that is because the Dell doesnt support usb3?) The iommugroup is...

Great! I didn't know that was possible. I tried that and it seems to have worked just fine. Didn't have to edit/reconfigure anything. My storage.cfg looks ok root@proxmox ~ # cat /etc/pve/storage.cfg dir: local path /var/lib/vz content iso,vztmpl,backup lvmthin: local-lvm...

Somewhere along my journey I messed up my lvm usage and didn't realize I was putting mv vm disks in the wrong volume group. I have proxmox 8.3.0 installed on a Dell R710 with 2 VGs (pve and vmdata) pve (1.8TB) should only be for the OS vmdata (7.3 TB) is where I intended to store all my VM...

Nevermind, I got it working again. /etc/pve/nodes only has 1 folder now which is the hostname of my standalone node. "proxmox" root@proxmox /etc/pve/nodes # ls proxmox And the proxmox folder has this root@proxmox /etc/pve/nodes/proxmox # ls lrm_status lxc openvz priv pveproxy-ssl.key...

I changed the hostname & IP of my proxmox ve 8.2.2 and updated the SSL cert but now all my VMs are missing. The cert is now valid and I can connect to the UI via https. I probably just messed up the links under /etc/pve but I'm confused where the files need to be. I backed up everything to...

Nevermind, it seems to have magically started working without changing anything? (base) almiller ~  ssh -t root@192.168.254.101 ip addr show|grep global inet 192.168.254.101/24 scope global vmbr0.1 inet 172.17.1.100/24 scope global vmbr1.30 Connection to 192.168.254.101 closed...

I can't seem to login to my proxmox 7.2-7 server on the vmbr0 interface but I CAN on the vmbr1 interface? I'm seeing alot of "vmbr0: port x entered [blocking|disabled|forwarding] state" messages My local DNS ressolves correctly: (base) almiller  ~  dig proxmox.internal.lan...

Thanks @bobmc but actually it's working now. All I needed to do was set the correct bridge interface. I changed it from vmbr0 to vmbr1 and things started working. root@pve ~ # grep ^net0 /etc/pve/nodes/pve/qemu-server/401.conf net0: virtio=1A:68:AE:F6:D7:E0,bridge=vmbr1,firewall=1 I created...

Hi (obviously) I'm a proxmox noob and ..... I have an old Dell running pve-manager/7.2-7 with 4 physical ethernet ports eno1-eno4 1st port is connected to switch and has address 172.16.1.101 So far all my VMs are deployed in this subnet (172.16.1.0/24) and everything works fine. I want to...

Nevermind, I found the networking docs and changed my /etc/network/interfaces to auto lo iface lo inet loopback iface eno1 inet manual iface eno2 inet manual iface eno3 inet manual iface eno4 inet manual auto vmbr0 iface vmbr0 inet static address 172.16.1.101/24 gateway 172.16.1.1...

I inherited an old Dell with pve-manager/7.2-7 installed. The machine has 4 physical interfaces and 1 port is configured for 172.16.1.0/24 I deployed some VMs in the same subnet and everything is fine. But now I'd like to use another physical interface for a new subnet 172.17.1.0/24 so that I...

Thanks fiona, I was able to mount the disk on the PVE server and determined where are the inodes are being used up. On the VM rootfs had 762.2K inodes k3s-master:~# df -hi / Filesystem Inodes Used Available Use% Mounted on /dev/sda3 762.0K 762.0K 0...

Is there a way to mount the disk on the proxmox server and extend or repair it? I have pve-manager/7.2-7/d0dd0e85 (running kernel: 5.15.39-3-pve) I have a vm that boots up but runs out of inodes. I.e.: I can login and touch 1 file, but touching a 2nd file says "no space left on device" The...

I decided to toss the usb1.0 joystick into my cheap-hardware-junk-from-amazon pile. After plugging the device into a "real" machine, I noticed it kept constantly connecting/disconnecting. In the meantime I put a PCIe x4 USB3 card in my server and was able to passthrough the whole PCIe card to...

Another attempt. Removed all usb devices. Assigned all 3 via the GUI via the port option After reboot 2 of the 3 are visible but not the joystick ❯ lsusb Bus 002 Device 003: ID 32e4:4689 HD USB Camera HD USB Camera Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device...

Seems wierd, a different device shows up? What is 0409:55aa? So I removed all usb devices again, rebooted. After reboot ❯ lsusb Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Then added this one...

Oh, I see 0909:0050 was NOT recognized. I removed them all, rebooted. Then did this: the VM before assignments: ❯ lsusb Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub assigned the device from PVE...

FYI: I added a different device and it's recognized along side the camera. root@pve ~ # qm set 104 -usb2 host=0909:0050 update VM 104: -usb2 host=0909:0050 root@pve ~ # qm config 104 |grep usb usb0: host=32e4:4689 usb1: host=0079:0006 usb2: host=0909:0050 ❯ lsusb Bus 002 Device 002: ID...

Sure. root@pve ~ # qm config 104 boot: order=scsi0;ide2;net0 cores: 6 cpu: kvm64 ide2: local:iso/debian-11.4.0-amd64-DVD-1.iso,media=cdrom memory: 65536 name: debi11 net0: virtio=62:91:F6:25:A2:6F,bridge=vmbr0,firewall=1 numa: 0 onboot: 1 ostype: l26 scsi0: local-lvm:vm-104-disk-0,size=32G...