Search results for query: WiFi

This information isn't quite right. I've been running my Proxmox server entirely on a WiFi connection for the last three years. It hosts a large number of LXCs and VMs, and I've kept the connection current by progressively upgrading from WiFi 5 to WiFi 6, and most recently to WiFi 7. I have...

...BACKSTORY I have a fairly good config with lots of storage and RAM but probably what matters here are: Motherboard: MSI MAG B660M MORTAR MAX WIFI DDR4 Micro ATX LGA1700 CPU: Intel Core i5-12400F 2.5 GHz 6-Core GPU: NVIDIA Founders Edition GeForce RTX 5090 32 GB Proxmox Version: 8.4.9...

im trying to use make to compile a driver for a wifi dongle but it keeps failing and im not really sure how to fix it. i have installed the make package and the wifi dongle does support linux output of make command is to long so its here https://pastebin.com/hNjhMcvd

...permanent, what would be the best way to run a small script setting the country on boot? It needs to be somewhere in the host, not in the container that will get the wifi card because iw only can set the country code in the host, not in the container, and ideally before the container gets...

...back up your original settings and make everything the same? My computer is configured as follows Intel Core Ultra 7 265K Asrock Z890 Pro RS WiFi White PowerColor Hellhound Spectral White AMD Radeon RX 9070 XT 16GB GDDR6...

im trying to make the driver for my usb wifi adapter but i keep getting errors the log is too long to post so its here https://pastebin.com/hNjhMcvd

...DeviceName: Onboard - Other Subsystem: Dell Device [1028:09a6] 00:14.3 Network controller [0280]: Intel Corporation Comet Lake PCH CNVi WiFi [8086:06f0] DeviceName: Onboard - Ethernet Subsystem: Intel Corporation Device [8086:4070] Kernel driver in use: iwlwifi...

...vmbr2 inet static address 172.16.16.9/24 gateway 172.16.16.1 bridge-ports ens3f0 bridge-stp off bridge-fd 0 mtu 9000 #Studio Lan Bridge auto vmbr1 iface vmbr1 inet static address 192.168.1.9/24 bridge-ports enp88s0 bridge-stp off bridge-fd 0 #Wifi Lan...

...01) 00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01) 00:14.3 Network controller: Intel Corporation Raptor Lake PCH CNVi WiFi (rev 01) 00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01) 00:15.1 Serial bus controller...

My upgrade path ended up working so didn't need to do a fresh install so gave up on the usb. I was using a 32GB patriot USB on a Z890 Creator WiFI with latest BIIOS. I had no issues running the 8.4 installer on this machine with the same process, and a mini but will try some more when i build...

...auto vmbr2 iface vmbr2 inet static address 172.16.16.9/24 bridge-ports ens3f0 bridge-stp off bridge-fd 0 mtu 1500 #Studio Lan Bridge auto vmbr1 iface vmbr1 inet static address 192.168.1.9/24 bridge-ports enp88s0 bridge-stp off bridge-fd 0 #Wifi Lan Bridge

...passtrough and literally I'm living in hell with this hope someone could point me in the right direction, the mobo is ASUS TUF Gaming B650-PLUS WIFI BIOS version: 3222 date: 03/05/2025. Proxmox host outputs: root@pve:~# pveversion pve-manager/8.4.5/57892e8e686cb35b (running kernel...

Still not having any success. This is my result when reaching https://10.0.0.86:8006 I only have one router and wifi network, so I am not sure that would be the issue but I am far from an expert

...a 2.5gb network with dual switches which have a 10g sfp+ uplink between eachother and round robin configuration to each server. There is also a wifi6e ap for wifi devices and as a backup for the 2.5gb network. My pc is connected via 40gb connectx-3pro card to each server and the servers both...

I checked my /etc/network/interfaces and it uses the static setting for the wireless interface, so I've gone ahead and updated the main post to reflect this. Curiously, no one else ever reported this issue prior and numerous people replied to this thread and the routed configuration thread that...

You do not need to manually add routes to VM's. Static routes only need to be added to hosts on your local network so they can access hosts on the vnet1 subnet. For your Windows VM, simply configure the Gateway setting to use the IP address of the vnet1 interface of the Proxmox server.

Got the host connected to internet via Wifi. Stuck on getting guest Windows VM connected to internet. I added vnet1 as network device to the Windows VM. But when I tried to do route add 192.168.3.0 MASK 255.255.255.0 192.168.0.1 on Windows, I get The route addition failed: Element not found...

I'm wanting to use it as a wireless access point for my network. My 2.4GHz died on my main wifi router and I've been using a portable wifi extender to temporarily get 2.4 back. Since I have the wireless adapter on this box I was hoping to use it to handle it but yea, looks like USB is my best...

Sad. I have no better idea other than getting a USB WiFi adapter and pass that though instead. This should work. What were you planning on doing with it in the VM? Maybe there's a different/better way.

I have a little fanless mini pc I'm using for Proxmox to run OPNSense and Home Assistant and I'm trying to pass through my wireless interface to the OPNSense VM. The Amazon listing is no longer available, but this was the description of the item: Here are the cpu specs: Intel I3-4005U I...