Search results for query: Thunderbolt 6.8

I’m using that NIC myself. It works under certain conditions, though there are some issues. Kernel version: 6.8.4-2-pve ASPM disabled: Edit /etc/default/grub and set GRUB_CMDLINE_LINUX_DEFAULT="quiet pcie_aspm=off" Then run update-grub and reboot. It was recognized even without disabling...

when i plug cable on ethernet port i have this message some minutes after [ 116.522988] vmbr1: port 1(enp2s0) entered disabled state [ 119.468857] igc 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 119.469101] vmbr1: port 1(enp2s0) entered blocking state [...

Error 52.715851] pcieport 0000:00:01.4: AER: Uncorrectable (Non-Fatal) error message received from 0000:02:00.0 [ 52.715867] igc 0000:02:00.0: PCIe Bus Error: severity=Uncorrectable (Non-Fatal), type=Transaction Layer, (Requester ID) [ 52.715871] igc 0000:02:00.0: device [8086:15f3]...

I tried to use a Thunderbolt 3 NIC with Intel 82599 chip inside, but Proxmox doesn't recognize it & doesn't create the network interfaces. Proxmox is on v9.06, all latest updates installed. Also Tried with & without Secure boot & trusted computing. Tested to work on windows, so doesn't seem to...

I have never tested using the property match have you tried enclosing it in quotes incase there are escaping issues on the / symbols you could also try using globbing (property accepts * and ?) if chatgpt is not hallucinating something like Property=DEVPATH=*/0-3 though of course that could...

I am sure I am missing something here. I have the following two thunderbolt net devices: P: /devices/pci0000:00/0000:00:0d.2/domain0/0-0/0-1/0-1.0 M: 0-1.0 R: 0 J: +thunderbolt:0-1.0 U: thunderbolt T: thunderbolt_service V: thunderbolt-net E...

Hi Perhaps the issue is the nomodeset. I only installed Proxmox so I do not believe I am running the Debian Kernel. root@minipc:~# cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-6.14.8-2-pve root=/dev/mapper/pve-root ro nomodeset quiet root@minipc:~# lspci -nnk 00:00.0 Host bridge [0600]...

The OWC miniStack STX contains one 4TB NVMe SSD and one 256GB SATA SSD. If I connect the thunderbolt cable from the STX to a USB3-A type output on the Mac Mini via an adapter, only the 256GB SATA disk is visible to PVE. And so is also the case if I boot up the Mini using Linux Mint 22.1 install...

Here are my returns: I don't think I can get temperature information because I am using a terramaster d6-320? dmesg | grep -i nvme dmesg | grep -i i/o [ 1.913405] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.913518] nvme nvme0: pci function 0000:01:00.0 [ 1.940084]...

agree 100%, and in homelab you are looked own on if you actually bought your hardware new, smh still they are better locations than the truenas forums, reddit and discord where they just want to tell you you are stupid for wanting to try something, whereas here it is more "well that seems odd...

that usually doesn't mean that it hangs at that point, but that you don't get any of the rest of the output. you could try booting with "quiet" removed from the kernel cmdline (you can edit it for one boot in the Grub menu by hitting 'e'), that should display more messages. likely something...

I upgraded my first node, i think it di it correctly. Now when it boots, it hangs here (grub menu is accessible) I can get in to recovery mode via grub, i ran journalctl -xb and the last items relate to frr and thunderbolt, where i have custom configuration I don't really know where to go...

Thank you, that is very helpful and looks promising, will try it in the lab soon.

@Kollskegg the udev link files support general globbing (i had to look up what that mean) this means yuou just make the devpath match parameter and specificy as much or as little as needed to match see here https://www.man7.org/linux/man-pages/man7/udev.7.html it shows all the UDEV parameters...

Not sure if this helps, but here is my lspci output from an Intel NUC 13 Pro: 00:00.0 Host bridge: Intel Corporation Raptor Lake-P/U 4p+8e cores Host Bridge/DRAM Controller 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe Graphics] (rev 04) 00:06.0 PCI bridge: Intel...

Hi, did you ever resolve this question? I have the exact same challenge.

Hello! I noticed I was getting horrible internet download speed on two of my Debian Containers (CT) on my Proxmox host while the host itself could download fine (connection is 1G down / 100M up fibre). Specifically, around 10 Megabits/sec download in the CT versus 800 Megabits/sec on the host...

Sorry for resurecting an old thread but I think it should be /126 for 3 nodes max, or lower migration: network=fc00::81/128

Hallo liebe Community. Als neu Einsteiger und demnächst als führender Verantwortlicher eines Proxmox Clusters habe ich diesbezüglich einige Fragen, vielleicht könnt Ihr mir weiter helfen. Mein Testsystem sieht folgendermaßen aus: 2 x MS01 Minisforum (Als Testumgebung) später im Echtbetrieb...

I have a 3 node Intel NUC cluster with meshed Thunderbolt connections between them for a ceph storage pool. After applying the latest four updates and rebooting, the ceph cluster is no longer available. Other than an update a few months ago where FRR was updated to 10.2.2 it has been rock solid...