Search results

Hi, as per attached picture, I want to move "Proxmox6" node to bottom of cluster tree, I adjusted ID in conf file /etc/pve/corosync.conf, the new IDs only shows up in datacenter cluster view, and in datacenter summary, ID did not take effect. How can I move this node down to the bottom? thanks...

Thanks, aaron; You are absolutely correct. Before I thought my IT raid card is not recognized by bio, that is why I only had two disks (0 & 1, I thought 0&1 is disks on my first raid card) in boot order. This morning, I added disk #2&#3 and boot off disk#2 instead, then it is a success. I...

Hi, I have a 4 nodes cluster and ceph working well for few months now, one machine has a bit older hardware, cpu = x5670 (about 2010 cpu) Last week, I upgrade to new Kernel 5.13.19-4, then I reboot, Proxmox failed to find boot drive. At the end, I have pull out all ceph osd disks, then reboot...

Hi, everyone; Yesterday 02/26/22, I upgraded to kernel 5.13.19-4 pve, It caused one of my nodes (they are in a cluster) failed to boot, this node has X5675 cpu, when I reboot it, I do not see any grub screen, just go into a reboot loop. Wondering anybody has similar issue with this older...

I am just testing a xpenology box on proxmox, trying to fill up all slots, and noticed that I can not go more than 6 Sata.

I am using proxmox7, can not get more than 6 sata drives, anyway to go around this, and add more sata drives? my vm I am trying to setup, it does not take scsi nor virto. thanks.

thanks, I will look into that.

I logout from proxmox, and try to remote desktop to vm, this time, vnc cursor does not show, but a cursor circle still showing, now I see a circle (from vnc), and my mouse cursor (remote desktop mouse cursor).

yes, I am using firefox to manage proxmox, and view vm console. but I was not login through vm console when I am using remote desktop

Hi, I installed a windows 2019 server VM, then enable remote desktop, but, after I log in through remote desktop, but I saw two mouse cursors, one is vnc cursor (not moving, but shown), other is remote mouse cursor (moving), anybody know how to get rid of vnc cursor? many thanks.

I am trying to follow up on my last issue, 1 OSD(s) have spurious read errors message. Now, I had done twice scrub and depp scrub, no more error messages, but this old warning message still there. Anybody can let me know how to get clear or achieve this old warning message. I can disable this...

I guess there is no action need to take, because ceph has self recovered. But, still, I do not know how to reset this warning message, over 24 hours now, ceph health still showing “health warn”. Anybody could possible offer some suggestions?

I have a 4 nodes cluster proxmox 7.1-5, ceph 16.2.6, today ceph report an error: 1 OSD(s) have spurious read errors osd.3 reads with retries: 1 No sure how to deal with this error, I checked smart for this ssd disk, no error show. Anybody could possible give me some sugguestion?

Hey; Yesterday, I had a failed OSD, is shows down/out, but no email notification, I am wondering how do I setup a email notification on failure of ceph osd? thanks.

VMs are using the storage pool from those 4 ssd OSD ceph. zfs-1 disks only running proxmox os, not involve in any VMs pool.

Thanks for your reply, here is my layout: 1. node #1, sda & sdb = zfs-1 (both sas 15k disk running proxmox), sdc = 1tb ssd OSD 2. node #2, sda & sdb = zfs-1 (both sas 15k disk running proxmox), sdc = 1tb ssd OSD 3. node #3, sda & sdb = zfs-1 (both ssd disk running proxmox), sdc = 1tb ssd OSD...

one more thing, all 4 nodes running zfs (raid 1) on system disk (2 disks each node)

Hi, I have a 4 nodes cluster proxmox7, two of them has sas 15k disk as proxmox disk, and other tow has ssd as proxmox disks, but, I am running ceph on these 4 nodes, and all my VMs are on ceph storage. I did pveperf test using command "pveperf", wondering since I am running all VMs on ceph...

Hi, Moayad; Here you go, thanks for your help. :~# pveversion -v proxmox-ve: 7.0-2 (running kernel: 5.11.22-5-pve) pve-manager: 7.0-13 (running version: 7.0-13/7aa7e488) pve-kernel-helper: 7.1-2 pve-kernel-5.11: 7.0-8 pve-kernel-5.11.22-5-pve: 5.11.22-10 pve-kernel-5.11.22-4-pve: 5.11.22-9...

Hey, I have 4 nodes cluster, a win7 vm migration from node 5 to node 4 has no problem, but I can not migration from node 5 to node 3, here is error code in status. It would be a great help if someone can offer me some suggestions how to resolve this, thanks. error status: 2021-10-30...