Search results

Hi, are you planning, in an upcoming release, to allow the restore of a single virtual disk in addition to the entire VM and the single file? Another really useful feature would be being able to create VLANs in the GUI ... Thank you

Hi, In my cluster I have 2 pools, one for NVMe disks and one for SSD disks. These are the step that I followed to achieve my goal: Create 2 rules, one for NVMe and one for SSD: ceph osd crush rule create-replicated <rule-name> <root> <failure-domain> <class> So for NVMe disks the above...

Hi, so if I understand correctly, you suggest to set the following Ceph flags: ceph osd set noscrub ceph osd set nodeep-scrub ceph osd set noout before starting the update of node 1 and to remove them with: ceph osd unset noscrub ceph osd unset nodeep-scrub ceph osd unset noout only when...

Now the question is: before update node 2 do you advice to unset the OSD flags with ceph osd unset noscrub ceph osd unset nodeep-scrub ceph osd unset noout wait until Ceph is OK and then repeat the procedure as done for node 1 (set the OSD flags again, upgrade node 2 and then unset the OSD...

Hi, is there an official procedure to update a PVE7 Cluster with Ceph 16.2? I have a Cluster with 5 nodes PVE 7.0.10 with Ceph 16.2.5. Up to now this is the procedure I have used (for example to update node 1): 1. Migrate all VMs on node 1 to others nodes 2. apt update 3. apt dist-upgrade 4...

My replica number is 3

So for my cluster you advice to run the following commands: ceph config set global osd_pool_default_pg_autoscale_mode off But how can I set pg_num and pgp_num at 1024 ? Is it safe to do it in production environment? Can I use this guide...

Hi, I'm using the driver of PVE7, I only upgraded the firmware that I found on mellanox site. Then I downloaded the mellanox tools at the following link: https://www.mellanox.com/products/adapter-software/firmware-tools you have also to download the firmware for your card... Follow this mini...

Hi, I have a cluster of 5 PVE7 nodes with Ceph 16.2.5. The Hardware configuration of 4 of 5 nodes is: CPU: n.2 EPYC ROME 7402 RAM: 1 TB ECC 2 x SSD 960 GB ZFS Raid 1 for Proxmox 4 x Micron 9300 MAX 3.2 TB NVMe for Pool 1 named Pool-NVMe 2 x Micron 5300 PRO 3.8 TB SSD for Pool 2 named Pool-SSD...

Hi Fabian, so from the GUI of PVE7 it's possible to restore only the full VM and not a single virtual disk?

Hi, my configuration is: Cluster of 5 PVE nodes (PVE 7.0-10) whit Ceph 16.2.5 n. Proxmox Backup Server 1.0-5 (I will update it next month) I have some backups of a Windows Server 2019 guest wits 2 virtual disks (scsi0 and scsi1) and I want to restore only one virtual disk (scsi0). How can I...

Hi, I would like to send PVE7.0.11 metrics to a InfluxDB v2 server and I tried the native plug-in InfluxDB in PVE7. Now the problem is that in my InfluxDB v2 Server I used a self signed certificate and when I try to "create" an instance of InfluxDB with protocol HTTPS I receive the following...

Hi, i have a cluster of 5 PVE7 nodes whit mellanox nic (MCX516A-CCAT) and I wolud like to installa mellanox en driver, but on their site there isn't Debian 11 but debian 10.8 or Ubuntu 20.04 or 21.04 . Now the question is: which one should I use? Thank you

Hi, I did some tests in PVE7 and Ceph 16.2 and I managed to reach my goal, which is to create 2 pools, one for NVMe disks and one for SSD disks. These are the steps: Install Ceph 16.2 on all nodes; Create 2 rules, one for NVMe and one for SSD (name rule for NVMe: nvme_replicated - name rule...

Hi, in my PVE 7 Cluster I have 5 nodes and each node has 4 NVMe disks and 2 SSD disks. Now I would like to create 2 different pools, one for NVMe and one for SSD. I have carefully read the doc "Ceph CRUSH & device classes" but some steps are not clear to me. Which are the steps to achieve my...

Hi, I installed Proxmox 7, upgrading it from Proxmox 6.4 due to the problem described in this post: https://forum.proxmox.com/threads/proxmox-7-stable-installation-aborted.92443/#post-403342 Everything goes well, except the fact that all RRD Graph are empty, totally white! I installed chrony...

So I'm doomed to install PVE 6.4 first and then upgrade to 7 which was just what I wanted to avoid ...

Do you recommend installing Debian 11 first and then Proxmox 7 or installing PVE 6.4 first and then updating everything? Note that I would like the root partition in zfs raid1... Thank you

Could someone help me please? I would like to avoid installing 6.4 and then upgrading to 7. Thank you

It's not so simple to do it with a Big Twin. The Graphic Card must be Low Profile and I don't have one.