Recent content by Vassterak

Hi, thanks for the reply. I just wanted to close this thread because I forgot to enable: ACS (Access Control Services) in UEFI and now it's working. I know that for every device You need to have separated IOMMU group. But I mistakenly thought I had everything set up correctly and it still didn't...

Hello, I'm trying to passtrought a pcie nvme ssd to virtual machine. I'm not using a HBA, but each ssd is directly connected to pcie connector. I followed up: pcie passthrough guide. IOMMU is enabled and working, all required modules are also enabled. Also the nvme drive is using the latest...

Hi, thanks all of you for answer. I'm running 2 Windows VMs and one ubuntu VM. And since last week I'm measuring total LBAs written and it's around 50gb per day. And if drives are rated for 300TBW and I will use let's say 80gb per day still the drives would last approximately 10years right...

Ok, But why SMART report 512 bytes is it a bug? Or is it on purpose? I found some threads on other forums and I found that: It's on purpose for some compatibility? But it wasn't corfirmed.

Hello, I'm creating new zfs pool (raid 1) And I have 2x Samsung 860 evo 512GB I know that proxmox like to write a lot of stuff to disks (my setup 45 gb per 24 hours average, all VM idling none of them writing to disks) And I didn't find any satisfying result about ashift for ssd. Is it right...

Hello, Thank you for tips. I have figured it out. I needed to enable: 4G encoding/decoding; SR-IOV in BIOS(UEFI) on my motherboard. Also this video helped: https://www.youtube.com/watch?v=fgx3NMk6F54 Nice tips are in comments of that video! Check it out! FOR EVERY ONE WHO STILL HAVE A PROBLEM...

Hello, I'm trying to make pcie passtrough of MSI GT 710 to Windows 10 machine, for basic video encode/decode. I've been following this tutorial: https://pve.proxmox.com/wiki/Pci_passthrough And when I got to point "How to know if a Graphics Card is UEFI (OVMF) compatible" I found out that GT...