I did. I have the scsi1 set as the first one:
Which is the main one, I believe:
I tried the scsi2 one and that went to the network boot, so I have a feeling that wasn't it. One thing to note, is that I did not setup an OS for this yet. It technically empty since I was trying to get it to...
Ok, so I ran that command and then I noticed that it picked up on the two disks that should be attached to it:
I tried to boot the VM just to see what happens and it just hangs, so I'm not sure if there another step that I am missing or if there is something else that I need to set?
The SSD that I had Promox on died, so I needed to re-install Proxmox on a fresh drive. I had all of my OS's on a seperate SSD and the VM storage is on another NVME drive. Looks like the NVME drive that has the previous VM's on it is recognized by Proxmox, but it doesn't look like it's mounted...
Ok after scouring the internet, I came across a post on Reddit with someone having a similar issue.
Turns out I needed to add this into the config for the VM:
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Apparently that was the fix that was needed.
So, hopefully this helps...
Yeah the errors don't mean anything or make a difference either.
I was able to edit the config.plist file and set the boot time out so I wouldn't have to manually select the boot loader when the VM fired up. That way I could unplug the keyboard to see if that was an issue and again, still stuck...
Cool, thanks! Yeah, I'll keep messing with it. I'm also not really sure if there is some other logging I can check to get a better idea of where things might be getting hung up at.
I looked into some more of the settings and I found a USB controller:
So I enabled that in the hardware...
Ok so, I noticed that it had the USB 3.0 enabled and if don't have that checked, it seems not to error out. But now it just hangs and nothing gets past the Apple boot screen. So, small progress...?
I'll keep messing with it since I still feel it's something with the USB. But if anyone has any...
I'm new to ProxMox and I've been messing around with installing VM's and I've also been successful with getting GPU pass through on other VM's such as Ubuntu and Windows 10.
I have successfully installed and have Big Sur running, but when I try to do a GPU pass through with a USB pass through...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.